#ifndef __LUNAIX_PCI_H
#define __LUNAIX_PCI_H
-#include <hal/io.h>
+#include <lunaix/device.h>
+#include <lunaix/ds/ldga.h>
#include <lunaix/ds/llist.h>
+#include <lunaix/types.h>
-#define PCI_CONFIG_ADDR 0xcf8
-#define PCI_CONFIG_DATA 0xcfc
+#define EXPORT_PCI_DEVICE(id, pci_devdef) \
+ EXPORT_DEVICE(id, &(pci_devdef)->devdef, load_pci_probe)
+
+#define PCI_MATCH_EXACT -1
+#define PCI_MATCH_ANY 0
+#define PCI_MATCH_VENDOR 0xffff
#define PCI_TDEV 0x0
#define PCI_TPCIBRIDGE 0x1
#define PCI_REG_VENDOR_DEV 0
#define PCI_REG_STATUS_CMD 0x4
-#define PCI_REG_BAR(offset) (0x10 + (offset)*4)
+#define PCI_REG_BAR(num) (0x10 + (num - 1) * 4)
-#define PCI_DEV_VENDOR(x) ((x)&0xffff)
-#define PCI_DEV_DEVID(x) ((x) >> 16)
-#define PCI_INTR_IRQ(x) ((x)&0xff)
-#define PCI_INTR_PIN(x) (((x)&0xff00) >> 8)
+#define PCI_DEV_VENDOR(x) ((x) & 0xffff)
+#define PCI_DEV_DEVID(x) (((x) & 0xffff0000) >> 16)
+#define PCI_INTR_IRQ(x) ((x) & 0xff)
+#define PCI_INTR_PIN(x) (((x) & 0xff00) >> 8)
#define PCI_DEV_CLASS(x) ((x) >> 8)
-#define PCI_DEV_REV(x) (((x)&0xff))
-#define PCI_BUS_NUM(x) ((x >> 16) & 0xff)
-#define PCI_SLOT_NUM(x) ((x >> 11) & 0x1f)
-#define PCI_FUNCT_NUM(x) ((x >> 8) & 0x7)
+#define PCI_DEV_REV(x) (((x) & 0xff))
+#define PCI_BUS_NUM(x) (((x) >> 16) & 0xff)
+#define PCI_SLOT_NUM(x) (((x) >> 11) & 0x1f)
+#define PCI_FUNCT_NUM(x) (((x) >> 8) & 0x7)
+
+#define PCI_BAR_MMIO(x) (!((x) & 0x1))
+#define PCI_BAR_CACHEABLE(x) ((x) & 0x8)
+#define PCI_BAR_TYPE(x) ((x) & 0x6)
+#define PCI_BAR_ADDR_MM(x) ((x) & ~0xf)
+#define PCI_BAR_ADDR_IO(x) ((x) & ~0x3)
+
+#define PCI_MSI_ADDR(msi_base) ((msi_base) + 4)
+#define PCI_MSI_DATA(msi_base, offset) ((msi_base) + 8 + offset)
+#define PCI_MSI_MASK(msi_base, offset) ((msi_base) + 0xc + offset)
+
+#define MSI_CAP_64BIT 0x80
+#define MSI_CAP_MASK 0x100
+#define MSI_CAP_ENABLE 0x1
+
+#define PCI_RCMD_DISABLE_INTR (1 << 10)
+#define PCI_RCMD_FAST_B2B (1 << 9)
+#define PCI_RCMD_BUS_MASTER (1 << 2)
+#define PCI_RCMD_MM_ACCESS (1 << 1)
+#define PCI_RCMD_IO_ACCESS 1
-#define PCI_ADDRESS(bus, dev, funct) \
- (((bus)&0xff) << 16) | (((dev)&0xff) << 11) | (((funct)&0xff) << 8) | \
- 0x80000000
+#define PCI_CFGADDR(pciloc) ((u32_t)(pciloc) << 8) | 0x80000000UL
+
+#define PCILOC(bus, dev, funct) \
+ (((bus) & 0xff) << 8) | (((dev) & 0x1f) << 3) | ((funct) & 0x7)
+#define PCILOC_BUS(loc) (((loc) >> 8) & 0xff)
+#define PCILOC_DEV(loc) (((loc) >> 3) & 0x1f)
+#define PCILOC_FN(loc) ((loc) & 0x7)
+
+#define PCI_ID_ANY (-1)
typedef unsigned int pci_reg_t;
+typedef u16_t pciaddr_t;
// PCI device header format
// Ref: "PCI Local Bus Specification, Rev.3, Section 6.1"
+#define BAR_TYPE_MMIO 0x1
+#define BAR_TYPE_CACHABLE 0x2
+#define PCI_DRV_NAME_LEN 32
+
+struct pci_base_addr
+{
+ u32_t start;
+ u32_t size;
+ u32_t type;
+};
+
struct pci_device
{
+ struct device dev;
struct llist_header dev_chain;
- uint32_t device_info;
- uint32_t class_info;
- uint32_t cspace_base;
- uint32_t msi_loc;
- uint16_t intr_info;
+ struct hlist_node dev_cache;
+
+ struct
+ {
+ struct device* dev;
+ struct device_def* def;
+ } binding;
+
+ pciaddr_t loc;
+ u16_t intr_info;
+ u32_t device_info;
+ u32_t class_info;
+ u32_t cspace_base;
+ u32_t msi_loc;
+ struct pci_base_addr bar[6];
};
+#define PCI_DEVICE(devbase) (container_of((devbase), struct pci_device, dev))
-// PCI Configuration Space (C-Space) r/w:
-// Refer to "PCI Local Bus Specification, Rev.3, Section 3.2.2.3.2"
+typedef void* (*pci_drv_init)(struct pci_device*);
-inline pci_reg_t
-pci_read_cspace(uint32_t base, int offset)
-{
- io_outl(PCI_CONFIG_ADDR, base | (offset & ~0x3));
- return io_inl(PCI_CONFIG_DATA);
-}
+#define PCI_DEVIDENT(vendor, id) \
+ ((((id) & 0xffff) << 16) | (((vendor) & 0xffff)))
-inline void
-pci_write_cspace(uint32_t base, int offset, pci_reg_t data)
+struct pci_device_def
{
- io_outl(PCI_CONFIG_ADDR, base | (offset & ~0x3));
- io_outl(PCI_CONFIG_DATA, data);
-}
+ u32_t dev_class;
+ u32_t dev_ident;
+ u32_t ident_mask;
+ struct device_def devdef;
+};
+/**
+ * @brief 根据类型代码（Class Code）去在拓扑中寻找一个设备
+ * 类型代码请参阅： PCI LB Spec. Appendix D.
+ *
+ * @return struct pci_device*
+ */
+struct pci_device* pci_get_device_by_class(u32_t class);
+
+/**
+ * @brief 根据设备商ID和设备ID，在拓扑中寻找一个设备
+ *
+ * @param vendorId
+ * @param deviceId
+ * @return struct pci_device*
+ */
+struct pci_device*
+pci_get_device_by_id(u16_t vendorId, u16_t deviceId);
+
+/**
+ * @brief 初始化PCI设备的基地址寄存器。返回由该基地址代表的，
+ * 设备所使用的MMIO或I/O地址空间的，大小。
+ * 参阅：PCI LB Spec. (Rev 3) Section 6.2.5.1, Implementation Note.
+ *
+ * @param dev The PCI device
+ * @param bar_out Value in BAR
+ * @param bar_num The index of BAR (starting from 1)
+ * @return size_t
+ */
+size_t
+pci_bar_sizing(struct pci_device* dev, u32_t* bar_out, u32_t bar_num);
+
+/**
+ * @brief Bind an abstract device instance to the pci device
+ *
+ * @param pcidev pci device
+ * @param devobj abstract device instance
+ */
void
-pci_probe();
+pci_bind_instance(struct pci_device* pcidev, void* devobj);
void
-pci_init();
+pci_probe_bar_info(struct pci_device* device);
void
-pci_print_device();
-
-struct pci_device* pci_get_device_by_class(uint32_t class);
-
-struct pci_device*
-pci_get_device_by_id(uint16_t vendorId, uint16_t deviceId);
+pci_probe_msi_info(struct pci_device* device);
#endif /* __LUNAIX_PCI_H */
git://scm.lunaixsky.com / lunaix-os.git / blobdiff