feat: better rtc framework which aims to remove single rtc restrictions.

[lunaix-os.git] / lunaix-os / includes / lunaix / peripheral / ps2kbd.h

diff --git a/lunaix-os/includes/lunaix/peripheral/ps2kbd.h b/lunaix-os/includes/lunaix/peripheral/ps2kbd.h
deleted file mode 100644 (file)
index 9a246ea..0000000
--- a/lunaix-os/includes/lunaix/peripheral/ps2kbd.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef __LUNAIX_PS2KBD_H
-#define __LUNAIX_PS2KBD_H
-
-#include <hal/io.h>
-#include <lunaix/ds/mutex.h>
-#include <lunaix/keyboard.h>
-
-#define PS2_PORT_ENC_DATA 0x60
-#define PS2_PORT_ENC_CMDREG 0x60
-#define PS2_PORT_CTRL_STATUS 0x64
-#define PS2_PORT_CTRL_CMDREG 0x64
-
-#define PS2_STATUS_OFULL 0x1
-#define PS2_STATUS_IFULL 0x2
-
-#define PS2_RESULT_ACK 0xfa
-#define PS2_RESULT_NAK 0xfe // resend
-#define PS2_RESULT_ECHO 0xee
-#define PS2_RESULT_TEST_OK 0x55
-
-// PS/2 keyboard device related commands
-#define PS2_KBD_CMD_SETLED 0xed
-#define PS2_KBD_CMD_ECHO 0xee
-#define PS2_KBD_CMD_SCANCODE_SET 0xf0
-#define PS2_KBD_CMD_IDENTIFY 0xf2
-#define PS2_KBD_CMD_SCAN_ENABLE 0xf4
-#define PS2_KBD_CMD_SCAN_DISABLE 0xf5
-
-// PS/2 *controller* related commands
-#define PS2_CMD_PORT1_DISABLE 0xad
-#define PS2_CMD_PORT1_ENABLE 0xae
-#define PS2_CMD_PORT2_DISABLE 0xa7
-#define PS2_CMD_PORT2_ENABLE 0xa8
-#define PS2_CMD_SELFTEST 0xaa
-#define PS2_CMD_SELFTEST_PORT1 0xab
-
-#define PS2_CMD_READ_CFG 0x20
-#define PS2_CMD_WRITE_CFG 0x60
-
-#define PS2_CFG_P1INT 0x1
-#define PS2_CFG_P2INT 0x2
-#define PS2_CFG_TRANSLATION 0x40
-
-#define PS2_DELAY 1000
-
-#define PS2_CMD_QUEUE_SIZE 8
-
-#define PS2_NO_ARG 0xff00
-
-struct ps2_cmd
-{
-    char cmd;
-    char arg;
-};
-
-struct ps2_kbd_state
-{
-    volatile char state;
-    volatile char masked;
-    volatile kbd_kstate_t key_state;
-    kbd_keycode_t* translation_table;
-};
-
-struct ps2_cmd_queue
-{
-    struct ps2_cmd cmd_queue[PS2_CMD_QUEUE_SIZE];
-    int queue_ptr;
-    int queue_len;
-    mutex_t mutex;
-};
-
-/**
- * @brief 向PS/2控制器的控制端口(0x64)发送指令并等待返回代码。
- * 注意，对于没有返回代码的命令请使用`ps2_post_cmd`，否则会造成死锁。
- * 通过调用该方法向控制器发送指令，请区别 ps2_issue_dev_cmd
- *
- * @param cmd
- * @param args
- */
-static u8_t
-ps2_issue_cmd(char cmd, u16_t arg);
-
-/**
- * @brief 向PS/2控制器的编码器端口(0x60)发送指令并等待返回代码。
- * 注意，对于没有返回代码的命令请使用`ps2_post_cmd`，否则会造成死锁。
- * 通过调用该方法向PS/2设备发送指令，请区别 ps2_issue_cmd
- *
- * @param cmd
- * @param args
- */
-static u8_t
-ps2_issue_dev_cmd(char cmd, u16_t arg);
-
-/**
- * @brief 向PS/2控制器发送指令，不等待返回代码。
- *
- * @param port 端口号
- * @param cmd
- * @param args
- * @return char
- */
-static void
-ps2_post_cmd(u8_t port, char cmd, u16_t arg);
-
-void
-ps2_device_post_cmd(char cmd, char arg);
-
-void
-ps2_kbd_init();
-
-void
-ps2_process_cmd(void* arg);
-
-#endif /* __LUNAIX_PS2KBD_H */