-#include <hal/acpi/acpi.h>
-#include <hal/ioapic.h>
#include <lunaix/clock.h>
-#include <lunaix/common.h>
#include <lunaix/input.h>
+#include <lunaix/isrm.h>
#include <lunaix/peripheral/ps2kbd.h>
#include <lunaix/syslog.h>
#include <lunaix/timer.h>
-#include <arch/x86/interrupts.h>
-#include <hal/cpu.h>
+#include <hal/intc.h>
+#include <sys/cpu.h>
+
#include <klibc/string.h>
-#include <stdint.h>
+#include <sys/interrupts.h>
+#include <sys/port_io.h>
#define PS2_DEV_CMD_MAX_ATTEMPTS 5
-LOG_MODULE("PS2KBD");
+LOG_MODULE("i8042");
static struct ps2_cmd_queue cmd_q;
static struct ps2_kbd_state kbd_state;
#define KBD_STATE_KWAIT 0x00
#define KBD_STATE_KSPECIAL 0x01
#define KBD_STATE_KRELEASED 0x02
+#define KBD_STATE_E012 0x03
+#define KBD_STATE_KRELEASED_E0 0x04
#define KBD_STATE_CMDPROCS 0x40
-#define KBD_ENABLE_SPIRQ_FIX
+// #define KBD_ENABLE_SPIRQ_FIX
+#define KBD_ENABLE_SPIRQ_FIX2
// #define KBD_DBGLOG
void
intr_ps2_kbd_handler(const isr_param* param);
+static u8_t
+ps2_issue_cmd_wretry(char cmd, u16_t arg);
+
void
ps2_device_post_cmd(char cmd, char arg)
{
kbd_idev = input_add_device("i8042-kbd");
- acpi_context* acpi_ctx = acpi_get_context();
- if (acpi_ctx->fadt.header.rev > 1) {
- /*
- * 只有当前ACPI版本大于1时，我们才使用FADT的IAPC_BOOT_ARCH去判断8042是否存在。
- * 这是一个坑，在ACPI v1中，这个字段是reserved！而这及至ACPI v2才出现。
- * 需要注意：Bochs 和 QEMU 使用的是ACPI v1，而非 v2
- * （virtualbox好像是v4）
- *
- * (2022/6/29)
- * QEMU在7.0.0版本中，修复了FADT::IAPC_BOOT无法正确提供关于i8042的信息的bug
- * https://wiki.qemu.org/ChangeLog/7.0#ACPI_.2F_SMBIOS
- *
- * 请看Bochs的bios源码（QEMU的BIOS其实是照抄bochs的，所以也是一个德行。。）：
- * https://bochs.sourceforge.io/cgi-bin/lxr/source/bios/rombios32.c#L1314
- */
- if (!(acpi_ctx->fadt.boot_arch & IAPC_ARCH_8042)) {
- kprintf(KERROR "i8042: not found\n");
- // FUTURE: Some alternative fallback on this? Check PCI bus for USB
- // controller instead?
- return;
- }
- } else {
- kprintf(KWARN "i8042: outdated FADT used, assuming exists.\n");
- }
+ /* FIXME This require systematical rework! */
+ // acpi_context* acpi_ctx = acpi_get_context();
+ // if (acpi_ctx->fadt.header.rev > 1) {
+ // /*
+ // *
+ // 只有当前ACPI版本大于1时，我们才使用FADT的IAPC_BOOT_ARCH去判断8042是否存在。
+ // * 这是一个坑，在ACPI v1中，这个字段是reserved！而这及至ACPI
+ // v2才出现。
+ // * 需要注意：Bochs 和 QEMU 使用的是ACPI v1，而非 v2
+ // * （virtualbox好像是v4）
+ // *
+ // * (2022/6/29)
+ // *
+ // QEMU在7.0.0版本中，修复了FADT::IAPC_BOOT无法正确提供关于i8042的信息的bug
+ // * https://wiki.qemu.org/ChangeLog/7.0#ACPI_.2F_SMBIOS
+ // *
+ // *
+ // 请看Bochs的bios源码（QEMU的BIOS其实是照抄bochs的，所以也是一个德行。。）：
+ // *
+ // https://bochs.sourceforge.io/cgi-bin/lxr/source/bios/rombios32.c#L1314
+ // */
+ // if (!(acpi_ctx->fadt.boot_arch & IAPC_ARCH_8042)) {
+ // kprintf(KERROR "not found\n");
+ // // FUTURE: Some alternative fallback on this? Check PCI bus for
+ // USB
+ // // controller instead?
+ // return;
+ // }
+ // } else {
+ // kprintf(KWARN "outdated FADT used, assuming exists.\n");
+ // }
char result;
ps2_post_cmd(PS2_PORT_CTRL_CMDREG, PS2_CMD_PORT2_DISABLE, PS2_NO_ARG);
// 2、清空控制器缓冲区
- io_inb(PS2_PORT_ENC_DATA);
+ port_rdbyte(PS2_PORT_ENC_DATA);
// 3、屏蔽所有PS/2设备（端口1&2）IRQ，并且禁用键盘键码转换功能
result = ps2_issue_cmd(PS2_CMD_READ_CFG, PS2_NO_ARG);
- result = result & ~(PS2_CFG_P1INT | PS2_CFG_P2INT | PS2_CFG_TRANSLATION);
+ result = result & ~(PS2_CFG_P1INT | PS2_CFG_P2INT);
ps2_post_cmd(PS2_PORT_CTRL_CMDREG, PS2_CMD_WRITE_CFG, result);
// 4、控制器自检
- result = ps2_issue_cmd(PS2_CMD_SELFTEST, PS2_NO_ARG);
+ result = ps2_issue_cmd_wretry(PS2_CMD_SELFTEST, PS2_NO_ARG);
if (result != PS2_RESULT_TEST_OK) {
- kprintf(KERROR "Controller self-test failed.");
- goto done;
+ kprintf(KWARN "controller self-test failed. (%x)\n", result);
+ // goto done;
}
// 5、设备自检（端口1自检，通常是我们的键盘）
- result = ps2_issue_cmd(PS2_CMD_SELFTEST_PORT1, PS2_NO_ARG);
+ result = ps2_issue_cmd_wretry(PS2_CMD_SELFTEST_PORT1, PS2_NO_ARG);
if (result != 0) {
- kprintf(KERROR "Interface test on port 1 failed.");
- goto done;
+ kprintf(KERROR "interface test on port 1 failed. (%x)\n", result);
+ // goto done;
}
+ ps2_post_cmd(PS2_PORT_CTRL_CMDREG, PS2_CMD_PORT2_DISABLE, PS2_NO_ARG);
+
// 6、开启位于端口1的 IRQ，并启用端口1。不用理会端口2，那儿一般是鼠标。
ps2_post_cmd(PS2_PORT_CTRL_CMDREG, PS2_CMD_PORT1_ENABLE, PS2_NO_ARG);
result = ps2_issue_cmd(PS2_CMD_READ_CFG, PS2_NO_ARG);
- result = result | PS2_CFG_P1INT;
+ // 重新设置配置字节，因为控制器自检有可能重置我们先前做的改动。
+ result = (result | PS2_CFG_P1INT) & ~(PS2_CFG_TRANSLATION | PS2_CFG_P2INT);
ps2_post_cmd(PS2_PORT_CTRL_CMDREG, PS2_CMD_WRITE_CFG, result);
// 至此，PS/2控制器和设备已完成初始化，可以正常使用。
- // 将我们的键盘驱动挂载到第204号中断上（已由IOAPIC映射至IRQ#1），
- intr_subscribe(PC_KBD_IV, intr_ps2_kbd_handler);
-
// 搞一个计时器，将我们的 ps2_process_cmd
// 挂上去。每隔5毫秒执行排在队头的命令。
// 为什么只执行队头的命令，而不是全部的命令？
*
* 所以，保险的方法是：在初始化后才去设置ioapic，这样一来我们就能有一个稳定的IRQ#1以放心使用。
*/
- uint8_t irq_kbd = ioapic_get_irq(acpi_ctx, PC_AT_IRQ_KBD);
- ioapic_redirect(irq_kbd, PC_KBD_IV, 0, IOAPIC_DELMOD_FIXED);
+ isrm_bindirq(PC_AT_IRQ_KBD, intr_ps2_kbd_handler);
-done:
cpu_enable_interrupt();
}
// 处理队列排头的指令
struct ps2_cmd* pending_cmd = &cmd_q.cmd_queue[cmd_q.queue_ptr];
- char result;
+ u8_t result;
int attempts = 0;
// 尝试将命令发送至PS/2键盘（通过PS/2控制器）
#endif
attempts++;
} while (result == PS2_RESULT_NAK && attempts < PS2_DEV_CMD_MAX_ATTEMPTS);
-
// XXX: 是否需要处理不成功的指令？
cmd_q.queue_ptr = (cmd_q.queue_ptr + 1) % PS2_CMD_QUEUE_SIZE;
}
void
-kbd_buffer_key_event(kbd_keycode_t key, uint8_t scancode, kbd_kstate_t state)
+kbd_buffer_key_event(kbd_keycode_t key, u8_t scancode, kbd_kstate_t state)
{
/*
forgive me on these ugly bit-level tricks,
key = key & (0xffdf |
-('a' > key || key > 'z' || !(state & KBD_KEY_FCAPSLKED)));
- struct input_evt_pkt ipkt = {
- .pkt_type = (state & KBD_KEY_FPRESSED) ? PKT_PRESS : PKT_RELEASE,
- .scan_code = scancode,
- .sys_code = key,
- };
+ struct input_evt_pkt ipkt = { .pkt_type = (state & KBD_KEY_FPRESSED)
+ ? PKT_PRESS
+ : PKT_RELEASE,
+ .scan_code = scancode,
+ .sys_code = (state << 16) | key };
input_fire_event(kbd_idev, &ipkt);
{
// This is important! Don't believe me? try comment it out and run on Bochs!
- while (!(io_inb(PS2_PORT_CTRL_STATUS) & PS2_STATUS_OFULL))
- ;
+ // while (!(port_rdbyte(PS2_PORT_CTRL_STATUS) & PS2_STATUS_OFULL))
+ // ;
// I know you are tempting to move this chunk after the keyboard state
// check. But DO NOT. This chunk is in right place and right order. Moving
// it at your own risk This is to ensure we've cleared the output buffer
// everytime, so it won't pile up across irqs.
- uint8_t scancode = io_inb(PS2_PORT_ENC_DATA);
+ u8_t scancode = port_rdbyte(PS2_PORT_ENC_DATA);
kbd_keycode_t key;
/*
}
#endif
+#ifdef KBD_ENABLE_SPIRQ_FIX2
+ if (scancode == PS2_RESULT_ACK || scancode == PS2_RESULT_NAK) {
+ return;
+ }
+#endif
+
#ifdef KBD_DBGLOG
kprintf(KDEBUG "%x\n", scancode & 0xff);
#endif
}
break;
case KBD_STATE_KSPECIAL:
- if (scancode == 0xf0) { // release code
- kbd_state.state = KBD_STATE_KRELEASED;
+ if (scancode == 0x12) {
+ kbd_state.state = KBD_STATE_E012;
+ } else if (scancode == 0xf0) { // release code
+ kbd_state.state = KBD_STATE_KRELEASED_E0;
} else {
key = kbd_state.translation_table[scancode];
kbd_buffer_key_event(key, scancode, KBD_KEY_FPRESSED);
kbd_state.translation_table = scancode_set2;
}
break;
+ // handle the '0xE0, 0x12, 0xE0, xx' sequence
+ case KBD_STATE_E012:
+ if (scancode == 0xe0) {
+ kbd_state.state = KBD_STATE_KSPECIAL;
+ kbd_state.translation_table = scancode_set2_ex;
+ }
+ break;
+ case KBD_STATE_KRELEASED_E0:
+ if (scancode == 0x12) {
+ goto escape_release;
+ }
+ // fall through
case KBD_STATE_KRELEASED:
key = kbd_state.translation_table[scancode];
kbd_buffer_key_event(key, scancode, KBD_KEY_FRELEASED);
+ escape_release:
// reset the translation table to scancode_set2
kbd_state.state = KBD_STATE_KWAIT;
kbd_state.translation_table = scancode_set2;
}
}
-static uint8_t
-ps2_issue_cmd(char cmd, uint16_t arg)
+static u8_t
+ps2_issue_cmd(char cmd, u16_t arg)
{
ps2_post_cmd(PS2_PORT_CTRL_CMDREG, cmd, arg);
// 等待PS/2控制器返回。通过轮询（polling）状态寄存器的 bit 0
// 如置位，则表明返回代码此时就在 0x60 IO口上等待读取。
- while (!(io_inb(PS2_PORT_CTRL_STATUS) & PS2_STATUS_OFULL))
+ while (!(port_rdbyte(PS2_PORT_CTRL_STATUS) & PS2_STATUS_OFULL))
;
- return io_inb(PS2_PORT_ENC_CMDREG);
+ return port_rdbyte(PS2_PORT_ENC_CMDREG);
+}
+
+static u8_t
+ps2_issue_cmd_wretry(char cmd, u16_t arg)
+{
+ u8_t r, c = 0;
+ while ((r = ps2_issue_cmd(cmd, arg)) == PS2_RESULT_NAK && c < 5) {
+ c++;
+ }
+ if (c >= 5) {
+ kprintf(KWARN "max attempt reached.\n");
+ }
+ return r;
}
static void
-ps2_post_cmd(uint8_t port, char cmd, uint16_t arg)
+ps2_post_cmd(u8_t port, char cmd, u16_t arg)
{
// 等待PS/2输入缓冲区清空，这样我们才可以写入命令
- while (io_inb(PS2_PORT_CTRL_STATUS) & PS2_STATUS_IFULL)
+ while (port_rdbyte(PS2_PORT_CTRL_STATUS) & PS2_STATUS_IFULL)
;
- io_outb(port, cmd);
- io_delay(PS2_DELAY);
+ port_wrbyte(port, cmd);
+ port_delay(PS2_DELAY);
if (!(arg & PS2_NO_ARG)) {
// 所有参数一律通过0x60传入。
- io_outb(PS2_PORT_ENC_CMDREG, (uint8_t)(arg & 0x00ff));
- io_delay(PS2_DELAY);
+ while (port_rdbyte(PS2_PORT_CTRL_STATUS) & PS2_STATUS_IFULL)
+ ;
+ port_wrbyte(PS2_PORT_ENC_CMDREG, (u8_t)(arg & 0x00ff));
+ port_delay(PS2_DELAY);
}
}
-static uint8_t
-ps2_issue_dev_cmd(char cmd, uint16_t arg)
+static u8_t
+ps2_issue_dev_cmd(char cmd, u16_t arg)
{
ps2_post_cmd(PS2_PORT_ENC_CMDREG, cmd, arg);
// 等待PS/2控制器返回。通过轮询（polling）状态寄存器的 bit 0
// 如置位，则表明返回代码此时就在 0x60 IO口上等待读取。
- while (!(io_inb(PS2_PORT_CTRL_STATUS) & PS2_STATUS_OFULL))
+ while (!(port_rdbyte(PS2_PORT_CTRL_STATUS) & PS2_STATUS_OFULL))
;
- return io_inb(PS2_PORT_ENC_CMDREG);
+ return port_rdbyte(PS2_PORT_ENC_CMDREG);
}
\ No newline at end of file
git://scm.lunaixsky.com / lunaix-os.git / blobdiff