#define __BOOT_CODE__
-#include <lunaix/mm/page.h>
+#include <lunaix/mm/pagetable.h>
+#include <lunaix/compiler.h>
#include <sys/boot/bstage.h>
-#include <sys/mm/mempart.h>
+#include <sys/mm/mm_defs.h>
-#define PT_ADDR(ptd, pt_index) ((ptd_t*)ptd + (pt_index + 1) * 1024)
-#define SET_PDE(ptd, pde_index, pde) *((ptd_t*)ptd + pde_index) = pde;
-#define SET_PTE(ptd, pt_index, pte_index, pte) \
- *(PT_ADDR(ptd, pt_index) + pte_index) = pte;
-#define sym_val(sym) (ptr_t)(&sym)
-
-#define KERNEL_PAGE_COUNT \
- ((sym_val(__kexec_end) - sym_val(__kexec_start) + 0x1000 - 1) >> 12);
-#define HHK_PAGE_COUNT \
- ((sym_val(__kexec_boot_end) - 0x100000 + 0x1000 - 1) >> 12)
-
-#define V2P(vaddr) ((ptr_t)(vaddr)-KERNEL_EXEC)
-
-// use table #1
-#define PG_TABLE_IDENTITY 0
+// Provided by linker (see linker.ld)
+extern u8_t __kexec_start[];
+extern u8_t __kexec_end[];
+extern u8_t __kexec_text_start[];
+extern u8_t __kexec_text_end[];
+extern u8_t __kboot_start[];
+extern u8_t __kboot_end[];
-// use table #2-8
-// hence the max size of kernel is 8MiB
-#define PG_TABLE_KERNEL 1
+// define the initial page table layout
+struct kernel_map {
+ pte_t l0t[_PAGE_LEVEL_SIZE];
+ pte_t pg_mnt[_PAGE_LEVEL_SIZE];
-// use table #9
-#define PG_TABLE_STACK 8
+ struct {
+ pte_t _lft[_PAGE_LEVEL_SIZE];
+ } kernel_lfts[16];
+} align(4);
-// Provided by linker (see linker.ld)
-extern u8_t __kexec_start;
-extern u8_t __kexec_end;
-extern u8_t __kexec_text_start;
-extern u8_t __kexec_text_end;
+static struct kernel_map kernel_pt __section(".kpg");
+export_symbol(debug, boot, kernel_pt);
-extern u8_t __kexec_boot_end;
void boot_text
-_init_page(x86_page_table* ptd)
+_init_page()
{
- ptd->entry[0] = NEW_L1_ENTRY(PG_PREM_RW, (ptd_t*)ptd + PG_MAX_ENTRIES);
+ struct kernel_map* kpt_pa = (struct kernel_map*)to_kphysical(&kernel_pt);
- // 对低1MiB空间进行对等映射（Identity
- // mapping），也包括了我们的VGA，方便内核操作。
- x86_page_table* id_pt =
- (x86_page_table*)GET_PG_ADDR(ptd->entry[PG_TABLE_IDENTITY]);
+ pte_t* kl0tep = (pte_t*) &kpt_pa->l0t[pfn_at(KERNEL_RESIDENT, L0T_SIZE)];
+ pte_t* kl1tep = (pte_t*) kpt_pa->kernel_lfts;
+ pte_t* boot_l0tep = (pte_t*) kpt_pa;
- for (u32_t i = 0; i < 256; i++) {
- id_pt->entry[i] = NEW_L2_ENTRY(PG_PREM_RW, (i << PG_SIZE_BITS));
- }
-
- // 对等映射我们的hhk_init，这样一来，当分页与地址转换开启后，我们依然能够照常执行最终的
- // jmp 指令来跳转至
- // 内核的入口点
- for (u32_t i = 0; i < HHK_PAGE_COUNT; i++) {
- id_pt->entry[256 + i] =
- NEW_L2_ENTRY(PG_PREM_RW, 0x100000 + (i << PG_SIZE_BITS));
- }
+ set_pte(boot_l0tep, pte_mkhuge(mkpte_prot(KERNEL_DATA)));
// --- 将内核重映射至高半区 ---
- // 这里是一些计算，主要是计算应当映射进的 页目录 与 页表 的条目索引（Entry
- // Index）
- u32_t kernel_pde_index = L1_INDEX(sym_val(__kexec_start));
- u32_t kernel_pte_index = L2_INDEX(sym_val(__kexec_start));
- u32_t kernel_pg_counts = KERNEL_PAGE_COUNT;
-
- // 将内核所需要的页表注册进页目录
- // 当然，就现在而言，我们的内核只占用不到50个页（每个页表包含1024个页）
- // 这里分配了3个页表（12MiB），未雨绸缪。
- for (u32_t i = 0; i < PG_TABLE_STACK - PG_TABLE_KERNEL; i++) {
- ptd->entry[kernel_pde_index + i] =
- NEW_L1_ENTRY(PG_PREM_RW, PT_ADDR(ptd, PG_TABLE_KERNEL + i));
+ // Hook the kernel reserved LFTs onto L0T
+ pte_t pte = mkpte((ptr_t)kl1tep, KERNEL_DATA);
+
+ for (u32_t i = 0; i < KEXEC_RSVD; i++) {
+ pte = pte_setpaddr(pte, (ptr_t)&kpt_pa->kernel_lfts[i]);
+ set_pte(kl0tep, pte);
+
+ kl0tep++;
}
- // 首先，检查内核的大小是否可以fit进我们这几个表（12MiB）
- if (kernel_pg_counts >
- (PG_TABLE_STACK - PG_TABLE_KERNEL) * PG_MAX_ENTRIES) {
+ // Ensure the size of kernel is within the reservation
+ pfn_t kimg_pagecount =
+ pfn((ptr_t)__kexec_end - (ptr_t)__kexec_start);
+ if (kimg_pagecount > KEXEC_RSVD * _PAGE_LEVEL_SIZE) {
// ERROR: require more pages
// here should do something else other than head into blocking
asm("ud2");
}
- // 计算内核.text段的物理地址
- ptr_t kernel_pm = V2P(&__kexec_start);
- ptr_t ktext_start = V2P(&__kexec_text_start);
- ptr_t ktext_end = V2P(&__kexec_text_end);
+ // Now, map the kernel
- // 重映射内核至高半区地址（>=0xC0000000）
- for (u32_t i = 0; i < kernel_pg_counts; i++) {
- ptr_t paddr = kernel_pm + (i << PG_SIZE_BITS);
- u32_t flags = PG_PREM_RW;
+ pfn_t kimg_end = pfn(to_kphysical(__kexec_end));
+ pfn_t i = pfn(to_kphysical(__kexec_text_start));
+ kl1tep += i;
- if (paddr >= ktext_start && paddr <= ktext_end) {
- flags = PG_PREM_R;
- }
+ // kernel .text
+ pte = pte_setprot(pte, KERNEL_EXEC);
+ pfn_t ktext_end = pfn(to_kphysical(__kexec_text_end));
+ for (; i < ktext_end; i++) {
+ pte = pte_setpaddr(pte, page_addr(i));
+ set_pte(kl1tep, pte);
- SET_PTE(ptd,
- PG_TABLE_KERNEL,
- kernel_pte_index + i,
- NEW_L2_ENTRY(flags, paddr))
+ kl1tep++;
}
- // 最后一个entry用于循环映射
- ptd->entry[PG_MAX_ENTRIES - 1] = NEW_L1_ENTRY(T_SELF_REF_PERM, ptd);
+ // all remaining kernel sections
+ pte = pte_setprot(pte, KERNEL_DATA);
+ for (; i < kimg_end; i++) {
+ pte = pte_setpaddr(pte, page_addr(i));
+ set_pte(kl1tep, pte);
+
+ kl1tep++;
+ }
+
+ // XXX: Mapping the kernel .rodata section?
+
+ // set mount point
+ pte_t* kmntep = (pte_t*) &kpt_pa->l0t[pfn_at(PG_MOUNT_1, L0T_SIZE)];
+ set_pte(kmntep, mkpte((ptr_t)kpt_pa->pg_mnt, KERNEL_DATA));
+
+ // Build up self-reference
+ pte = mkpte_root((ptr_t)kpt_pa, KERNEL_DATA);
+ set_pte(boot_l0tep + _PAGE_LEVEL_MASK, pte);
}
-void boot_text
-kpg_init(x86_page_table* ptd, u32_t kpg_size)
+ptr_t boot_text
+kpg_init()
{
-
- // 初始化 kpg 全为0
- // P.s. 真没想到GRUB会在这里留下一堆垃圾！ 老子的页表全乱套了！
- u8_t* kpg = (u8_t*)ptd;
- for (u32_t i = 0; i < kpg_size; i++) {
- *(kpg + i) = 0;
+ ptr_t kmap_pa = to_kphysical(&kernel_pt);
+ for (size_t i = 0; i < sizeof(kernel_pt); i++) {
+ ((u8_t*)kmap_pa)[i] = 0;
}
- _init_page(ptd);
+ _init_page();
+
+ return kmap_pa;
}
\ No newline at end of file
git://scm.lunaixsky.com / lunaix-os.git / blobdiff