Merge branch 'master' of github.com:Minep/lunaix-os

[lunaix-os.git] / lunaix-os / kernel / asm / x86 / interrupt.S

diff --git a/lunaix-os/kernel/asm/x86/interrupt.S b/lunaix-os/kernel/asm/x86/interrupt.S
index 4647e95a467da053aec06509b5612b149bd3698d..48dff2faff1850a4be0b7aca45926d76ab357118 100644 (file)
--- a/lunaix-os/kernel/asm/x86/interrupt.S
+++ b/lunaix-os/kernel/asm/x86/interrupt.S
@@ -1,7 +1,8 @@
 #define __ASM__
 #include <arch/x86/interrupts.h>
 #include <lunaix/common.h>
-// #define __ASM_INTR_DIAGNOSIS
+#include <lunaix/syscall.h>
+#define __ASM_INTR_DIAGNOSIS
 
 .macro isr_template vector, no_error_code=1
     .global _asm_isr\vector
@@ -21,10 +22,17 @@
         .skip 16
 #endif
 
+.section .bss
+    .align 16
+    lo_tmp_stack:
+        .skip 128
+    tmp_stack:
+
 .section .text
     isr_template FAULT_DIVISION_ERROR
     isr_template FAULT_GENERAL_PROTECTION, no_error_code=0
     isr_template FAULT_PAGE_FAULT, no_error_code=0
+    isr_template FAULT_STACK_SEG_FAULT, no_error_code=0
 
     isr_template LUNAIX_SYS_PANIC
     isr_template LUNAIX_SYS_CALL
@@ -38,10 +46,10 @@
 
     interrupt_wrapper:
         /*
-         Stack layout
+         Stack layout (layout of struct isr_param)
     msa:   [ss]
            [esp]
-           eflags
+           eflags     > offset = 48 + 16 = 64
            cs
            eip
            err_code   
@@ -62,6 +70,7 @@
             las: Least Significant Address
             msa: Most Significant Address
         */
+        cld
         pushl %esp
 
         subl $16, %esp
@@ -88,6 +97,12 @@
         movw %ax, %ds
         movw %ax, %es
 
+        # 保存用户栈顶指针。这是因为我们允许系统调用内进行上下文切换，而这样一来，我们就失去了用户栈的信息，
+        # 这样一来，就无法设置信号上下文。这主要是为了实现了pause()而做的准备
+        movl (__current), %eax  
+        movl 68(%esp), %ebx     # 取出esp
+        movl %ebx, 84(%eax)     # 存入__current->ustack_top
+
     1:
         movl %esp, %eax
         andl $0xfffffff0, %esp
@@ -96,9 +111,11 @@
 
         call intr_handler
 
+        movl (%esp), %eax
+
     .global soft_iret
     soft_iret:
-        popl %esp
+        movl %eax, %esp
 
         popl %eax
         popl %ebx
@@ -117,15 +134,86 @@
 
         addl $8, %esp
 
+        pushl %eax
 #ifdef __ASM_INTR_DIAGNOSIS
-        cmpl $0, (%esp)
-        jz 1f
-        iret
-1:
-        movl $__current, %eax
-        movl  (%esp), %ebx
-        movl $debug_resv, %ecx
-        ud2
-#else
-        iret
+        movl 4(%esp), %eax
+        movl %eax, debug_resv
 #endif
+        # 处理TSS.ESP的一些边界条件。如果是正常iret（即从内核模式*优雅地*退出）
+        # 那么TSS.ESP0应该为iret进行弹栈后，%esp的值。
+        # 所以这里的边界条件是：如返回用户模式，iret会额外弹出8个字节（ss,esp）
+        movl 8(%esp), %eax
+        andl $3, %eax
+        setnz %al
+        shll $3, %eax
+        addl $16, %eax
+        addl %esp, %eax
+        movl %eax, (_tss + 4)
+        popl %eax
+        iret
+
+    .global switch_to
+    switch_to:
+        # 约定
+        # arg1: 目标进程PCB地址 (next
+
+        popl %ecx               # next
+        movl __current, %eax    
+        movl 88(%eax), %ebx     # __current->pagetable
+        movl 88(%ecx), %eax     # next->pagetable
+        
+        cmpl %ebx, %eax         # if(next->pagtable != __current->pagetable) {
+        jz 1f
+        movl %eax, %cr3         #   cpu_lcr3(next->pagetable)
+                                # }
+    1:
+        movl %ecx, __current    # __current = next
+
+        # 我们已经处在了新的地址空间，为了避免影响其先前的栈布局
+        # 需要使用一个临时的栈空间
+        movl $tmp_stack, %esp
+        call signal_dispatch    # kernel/signal.c
+
+        test %eax, %eax         # do we have signal to handle?
+        jz 1f
+        jmp handle_signal
+    1:
+        leal 8(%ecx), %eax
+        jmp soft_iret
+
+    .global handle_signal
+    handle_signal:
+        # 注意1：任何对proc_sig的布局改动，都须及时的保证这里的一致性！
+        # 注意2：handle_signal在调用之前，须确保proc_sig已经写入用户栈！
+        leal 8(%eax), %ebx      # arg1 in %eax: addr of proc_sig structure in user stack
+
+        pushl $UDATA_SEG        # proc_sig->prev_context.ss
+        pushl %eax              # esp
+        pushl 64(%ebx)          # proc_sig->prev_context.eflags
+        pushl $UCODE_SEG        # cs
+        pushl $sig_wrapper      # eip for sig wrapper
+
+        movw $UDATA_SEG, %cx    # switch data seg to user mode
+        movw %cx, %es
+        movw %cx, %ds
+        movw %cx, %fs
+        movw %cx, %gs
+
+        iret  
+
+.section .usrtext
+    sig_wrapper:                # in user mode
+        movl %esp, %eax
+        and $0xfffffff0, %esp
+        subl $8, %esp
+        pushl %eax              # Addr to proc_sig structure 
+        pushl 4(%eax)           # proc_sig->sig_num     ---- 16 bytes aligned
+
+        call (%eax)             # invoke signal handler
+
+        # invoke the sigreturn syscall to exit the signal wrapper
+        movl $__SYSCALL_sigreturn, %eax
+        movl 4(%esp), %ebx
+        int $LUNAIX_SYS_CALL    
+
+        ud2                     # never reach!
\ No newline at end of file