feat: disk read/write support for both ATA and ATAPI device

[lunaix-os.git] / lunaix-os / hal / ahci / atapi.c

diff --git a/lunaix-os/hal/ahci/atapi.c b/lunaix-os/hal/ahci/atapi.c
index 193f8f30774a5bc65246286c99323ed26b6c7413..c245c0a060ac599529232205a5fc63751bffdb6d 100644 (file)
--- a/lunaix-os/hal/ahci/atapi.c
+++ b/lunaix-os/hal/ahci/atapi.c
@@ -1,4 +1,5 @@
 #include <hal/ahci/hba.h>
 #include <hal/ahci/hba.h>

+#include <hal/ahci/sata.h>

 #include <hal/ahci/scsi.h>
 #include <hal/ahci/utils.h>
 
 #include <hal/ahci/scsi.h>
 #include <hal/ahci/utils.h>
 


@@ -20,14 +21,13 @@ scsi_create_packet12(struct scsi_cdb12* cdb,
 void
 scsi_create_packet16(struct scsi_cdb16* cdb,
                      uint8_t opcode,
 void
 scsi_create_packet16(struct scsi_cdb16* cdb,
                      uint8_t opcode,

-                     uint32_t lba_hi,
-                     uint32_t lba_lo,
+                     uint64_t lba,

                      uint32_t alloc_size)
 {
     memset(cdb, 0, sizeof(*cdb));
     cdb->opcode = opcode;
                      uint32_t alloc_size)
 {
     memset(cdb, 0, sizeof(*cdb));
     cdb->opcode = opcode;

-    cdb->lba_be_hi = SCSI_FLIP(lba_hi);
-    cdb->lba_be_lo = SCSI_FLIP(lba_lo);
+    cdb->lba_be_hi = SCSI_FLIP(lba >> 32);
+    cdb->lba_be_lo = SCSI_FLIP((uint32_t)lba);

     cdb->length = alloc_size;
 }
 
     cdb->length = alloc_size;
 }
 


@@ -36,4 +36,87 @@ scsi_parse_capacity(struct hba_device* device, uint32_t* parameter)
 {
     device->max_lba = SCSI_FLIP(*(parameter + 1));
     device->block_size = SCSI_FLIP(*(parameter + 2));
 {
     device->max_lba = SCSI_FLIP(*(parameter + 1));
     device->block_size = SCSI_FLIP(*(parameter + 2));

+}
+
+void
+__scsi_buffer_io(struct hba_port* port,
+                 uint64_t lba,
+                 void* buffer,
+                 uint32_t size,
+                 int write)
+{
+    assert_msg(((uintptr_t)buffer & 0x3) == 0, "HBA: Bad buffer alignment");
+
+    struct hba_cmdh* header;
+    struct hba_cmdt* table;
+    int slot = hba_alloc_slot(port, &table, &header, 0);
+    int bitmask = 1 << slot;
+
+    // 确保端口是空闲的
+    wait_until(!(port->regs[HBA_RPxTFD] & (HBA_PxTFD_BSY)));
+
+    port->regs[HBA_RPxIS] = 0;
+
+    table->entries[0] =
+      (struct hba_prdte){ .byte_count = size - 1, .data_base = buffer };
+    header->prdt_len = 1;
+    header->options |= (HBA_CMDH_WRITE * (write == 1)) | HBA_CMDH_ATAPI;
+
+    uint32_t count = size / port->device->block_size;
+    if (count == 0) {
+        // 对ATAPI设备来说，READ/WRITE (16/12) 没有这个count=0的 special case
+        //  但是对于READ/WRITE (6)，就存在这个special case
+        goto fail;
+    }
+
+    struct sata_reg_fis* fis = table->command_fis;
+    void* cdb = table->atapi_cmd;
+    sata_create_fis(fis, ATA_PACKET, (size << 8) & 0xffffff, 0);
+
+    if (port->device->cbd_size == 16) {
+        scsi_create_packet16((struct scsi_cdb16*)cdb,
+                             write ? SCSI_WRITE_BLOCKS_16 : SCSI_READ_BLOCKS_16,
+                             lba,
+                             count);
+    } else {
+        scsi_create_packet12((struct scsi_cdb12*)cdb,
+                             write ? SCSI_WRITE_BLOCKS_12 : SCSI_READ_BLOCKS_12,
+                             lba,
+                             count);
+    }
+
+    port->regs[HBA_RPxCI] = bitmask;
+
+    wait_until(!(port->regs[HBA_RPxCI] & bitmask));
+
+    if ((port->regs[HBA_RPxTFD] & HBA_PxTFD_ERR)) {
+        // 有错误
+        sata_read_error(port);
+        goto fail;
+    }
+
+    vfree_dma(table);
+    return 1;
+
+fail:
+    vfree_dma(table);
+    return 0;
+}
+
+void
+scsi_read_buffer(struct hba_port* port,
+                 uint64_t lba,
+                 void* buffer,
+                 uint32_t size)
+{
+    __scsi_buffer_io(port, lba, buffer, size, 0);
+}
+
+void
+scsi_write_buffer(struct hba_port* port,
+                  uint64_t lba,
+                  void* buffer,
+                  uint32_t size)
+{
+    __scsi_buffer_io(port, lba, buffer, size, 1);

 }
\ No newline at end of file
 }
\ No newline at end of file