refactor: decouple the executable file implementations with execve functionality.

[lunaix-os.git] / lunaix-os / arch / x86 / hhk.c

diff --git a/lunaix-os/arch/x86/hhk.c b/lunaix-os/arch/x86/hhk.c
index c0e5f9a1b2ac2b2b4f8fc7b93c4f42e3cda6029a..5854b626b580f057ba92adc7d2115f85d5ec2aaa 100644 (file)
--- a/lunaix-os/arch/x86/hhk.c
+++ b/lunaix-os/arch/x86/hhk.c
@@ -1,25 +1,27 @@
 #include <arch/x86/boot/multiboot.h>
 #include <arch/x86/idt.h>
 #include <arch/x86/boot/multiboot.h>
 #include <arch/x86/idt.h>

+#include <lunaix/common.h>

 #include <lunaix/mm/page.h>
 #include <lunaix/mm/page.h>

-#include <lunaix/constants.h>

 
 

-#define PT_ADDR(ptd, pt_index)                       ((ptd_t*)ptd + (pt_index + 1) * 1024)
-#define SET_PDE(ptd, pde_index, pde)                 *((ptd_t*)ptd + pde_index) = pde;
-#define SET_PTE(ptd, pt_index, pte_index, pte)       *(PT_ADDR(ptd, pt_index) + pte_index) = pte;
-#define sym_val(sym)                                 (uintptr_t)(&sym)
+#define PT_ADDR(ptd, pt_index) ((ptd_t*)ptd + (pt_index + 1) * 1024)
+#define SET_PDE(ptd, pde_index, pde) *((ptd_t*)ptd + pde_index) = pde;
+#define SET_PTE(ptd, pt_index, pte_index, pte)                                 \
+    *(PT_ADDR(ptd, pt_index) + pte_index) = pte;
+#define sym_val(sym) (uintptr_t)(&sym)

 
 

-#define KERNEL_PAGE_COUNT           ((sym_val(__kernel_end) - sym_val(__kernel_start) + 0x1000 - 1) >> 12);
-#define HHK_PAGE_COUNT              ((sym_val(__init_hhk_end) - 0x100000 + 0x1000 - 1) >> 12)
+#define KERNEL_PAGE_COUNT                                                      \
+    ((sym_val(__kernel_end) - sym_val(__kernel_start) + 0x1000 - 1) >> 12);
+#define HHK_PAGE_COUNT ((sym_val(__init_hhk_end) - 0x100000 + 0x1000 - 1) >> 12)

 
 // use table #1
 
 // use table #1

-#define PG_TABLE_IDENTITY           0
+#define PG_TABLE_IDENTITY 0

 
 

-// use table #2-4
+// use table #2-8

 // hence the max size of kernel is 8MiB
 // hence the max size of kernel is 8MiB

-#define PG_TABLE_KERNEL             1
+#define PG_TABLE_KERNEL 1

 
 

-// use table #5
-#define PG_TABLE_STACK              4
+// use table #9
+#define PG_TABLE_STACK 8

 
 // Provided by linker (see linker.ld)
 extern uint8_t __kernel_start;
 
 // Provided by linker (see linker.ld)
 extern uint8_t __kernel_start;


@@ -27,108 +29,115 @@ extern uint8_t __kernel_end;
 extern uint8_t __init_hhk_end;
 extern uint8_t _k_stack;
 
 extern uint8_t __init_hhk_end;
 extern uint8_t _k_stack;
 

-void 
-_init_page(ptd_t* ptd) {
-    SET_PDE(ptd, 0, PDE(PG_PRESENT, ptd + PG_MAX_ENTRIES))
-    
-    // 对低1MiB空间进行对等映射（Identity mapping），也包括了我们的VGA，方便内核操作。
-    for (uint32_t i = 0; i < 256; i++)
-    {
-        SET_PTE(ptd, PG_TABLE_IDENTITY, i, PTE(PG_PREM_RW, (i << 12)))
+void
+_init_page(ptd_t* ptd)
+{
+    SET_PDE(ptd, 0, NEW_L1_ENTRY(PG_PREM_RW, ptd + PG_MAX_ENTRIES))
+
+    // 对低1MiB空间进行对等映射（Identity
+    // mapping），也包括了我们的VGA，方便内核操作。
+    for (u32_t i = 0; i < 256; i++) {
+        SET_PTE(ptd,
+                PG_TABLE_IDENTITY,
+                i,
+                NEW_L2_ENTRY(PG_PREM_RW, (i << PG_SIZE_BITS)))

     }
 
     }
 

-    // 对等映射我们的hhk_init，这样一来，当分页与地址转换开启后，我们依然能够照常执行最终的 jmp 指令来跳转至
+    // 对等映射我们的hhk_init，这样一来，当分页与地址转换开启后，我们依然能够照常执行最终的
+    // jmp 指令来跳转至

     //  内核的入口点
     //  内核的入口点

-    for (uint32_t i = 0; i < HHK_PAGE_COUNT; i++)
-    {
-        SET_PTE(ptd, PG_TABLE_IDENTITY, 256 + i, PTE(PG_PREM_RW, 0x100000 + (i << 12)))
+    for (u32_t i = 0; i < HHK_PAGE_COUNT; i++) {
+        SET_PTE(ptd,
+                PG_TABLE_IDENTITY,
+                256 + i,
+                NEW_L2_ENTRY(PG_PREM_RW, 0x100000 + (i << PG_SIZE_BITS)))

     }
     }

-    
+

     // --- 将内核重映射至高半区 ---
     // --- 将内核重映射至高半区 ---

-    
-    // 这里是一些计算，主要是计算应当映射进的 页目录 与 页表 的条目索引（Entry Index）
-    uint32_t kernel_pde_index = PD_INDEX(sym_val(__kernel_start));
-    uint32_t kernel_pte_index = PT_INDEX(sym_val(__kernel_start));
-    uint32_t kernel_pg_counts = KERNEL_PAGE_COUNT;
-    
+
+    // 这里是一些计算，主要是计算应当映射进的 页目录 与 页表 的条目索引（Entry
+    // Index）
+    u32_t kernel_pde_index = L1_INDEX(sym_val(__kernel_start));
+    u32_t kernel_pte_index = L2_INDEX(sym_val(__kernel_start));
+    u32_t kernel_pg_counts = KERNEL_PAGE_COUNT;
+

     // 将内核所需要的页表注册进页目录
     //  当然，就现在而言，我们的内核只占用不到50个页（每个页表包含1024个页）
     //  这里分配了3个页表（12MiB），未雨绸缪。
     // 将内核所需要的页表注册进页目录
     //  当然，就现在而言，我们的内核只占用不到50个页（每个页表包含1024个页）
     //  这里分配了3个页表（12MiB），未雨绸缪。

-    for (uint32_t i = 0; i < PG_TABLE_STACK - PG_TABLE_KERNEL; i++)
-    {
-        SET_PDE(
-            ptd, 
-            kernel_pde_index + i,   
-            PDE(PG_PREM_RW, PT_ADDR(ptd, PG_TABLE_KERNEL + i))
-        )
+    for (u32_t i = 0; i < PG_TABLE_STACK - PG_TABLE_KERNEL; i++) {
+        SET_PDE(ptd,
+                kernel_pde_index + i,
+                NEW_L1_ENTRY(PG_PREM_URW, PT_ADDR(ptd, PG_TABLE_KERNEL + i)))

     }
     }

-    
+

     // 首先，检查内核的大小是否可以fit进我们这几个表（12MiB）
     // 首先，检查内核的大小是否可以fit进我们这几个表（12MiB）

-    if (kernel_pg_counts > (PG_TABLE_STACK - PG_TABLE_KERNEL) * 1024) {
+    if (kernel_pg_counts >
+        (PG_TABLE_STACK - PG_TABLE_KERNEL) * PG_MAX_ENTRIES) {

         // ERROR: require more pages
         //  here should do something else other than head into blocking
         // ERROR: require more pages
         //  here should do something else other than head into blocking

-        while (1);
+        asm("ud2");

     }
     }

-    
+

     // 计算内核.text段的物理地址
     uintptr_t kernel_pm = V2P(&__kernel_start);
     // 计算内核.text段的物理地址
     uintptr_t kernel_pm = V2P(&__kernel_start);

-    
+

     // 重映射内核至高半区地址（>=0xC0000000）
     // 重映射内核至高半区地址（>=0xC0000000）

-    for (uint32_t i = 0; i < kernel_pg_counts; i++)
-    {
-        SET_PTE(
-            ptd, 
-            PG_TABLE_KERNEL, 
-            kernel_pte_index + i, 
-            PTE(PG_PREM_RW, kernel_pm + (i << 12))
-        )
+    for (u32_t i = 0; i < kernel_pg_counts; i++) {
+        // FIXME: 只是用作用户模式（R3）测试！
+        //        在实际中，内核代码除了极少部分需要暴露给R3（如从信号返回），其余的应为R0。
+        SET_PTE(ptd,
+                PG_TABLE_KERNEL,
+                kernel_pte_index + i,
+                NEW_L2_ENTRY(PG_PREM_URW, kernel_pm + (i << PG_SIZE_BITS)))

     }
 
     // 最后一个entry用于循环映射
     }
 
     // 最后一个entry用于循环映射

-    SET_PDE(
-        ptd,
-        1023,
-        PDE(T_SELF_REF_PERM, ptd)
-    );
+    SET_PDE(ptd, PG_MAX_ENTRIES - 1, NEW_L1_ENTRY(T_SELF_REF_PERM, ptd));

 }
 
 }
 

-uint32_t __save_subset(uint8_t* destination, uint8_t* base, unsigned int size) {
+u32_t
+__save_subset(uint8_t* destination, uint8_t* base, unsigned int size)
+{

     unsigned int i = 0;
     unsigned int i = 0;

-    for (; i < size; i++)
-    {
+    for (; i < size; i++) {

         *(destination + i) = *(base + i);
     }
     return i;
 }
 
         *(destination + i) = *(base + i);
     }
     return i;
 }
 

-void 
-_save_multiboot_info(multiboot_info_t* info, uint8_t* destination) {
-    uint32_t current = 0;
-    uint8_t* info_b = (uint8_t*) info;
-    for (; current < sizeof(multiboot_info_t); current++)
-    {
+void
+_save_multiboot_info(multiboot_info_t* info, uint8_t* destination)
+{
+    u32_t current = 0;
+    uint8_t* info_b = (uint8_t*)info;
+    for (; current < sizeof(multiboot_info_t); current++) {

         *(destination + current) = *(info_b + current);
     }
 
         *(destination + current) = *(info_b + current);
     }
 

-    ((multiboot_info_t*) destination)->mmap_addr = (uintptr_t)destination + current;
-    current += __save_subset(destination + current, (uint8_t*)info->mmap_addr, info->mmap_length);
+    ((multiboot_info_t*)destination)->mmap_addr =
+      (uintptr_t)destination + current;
+    current += __save_subset(
+      destination + current, (uint8_t*)info->mmap_addr, info->mmap_length);

 
     if (present(info->flags, MULTIBOOT_INFO_DRIVE_INFO)) {
 
     if (present(info->flags, MULTIBOOT_INFO_DRIVE_INFO)) {

-        ((multiboot_info_t*) destination)->drives_addr = (uintptr_t)destination + current;
-        current += __save_subset(destination + current, (uint8_t*)info->drives_addr, info->drives_length);
+        ((multiboot_info_t*)destination)->drives_addr =
+          (uintptr_t)destination + current;
+        current += __save_subset(destination + current,
+                                 (uint8_t*)info->drives_addr,
+                                 info->drives_length);

     }
 }
 
     }
 }
 

-void 
-_hhk_init(ptd_t* ptd, uint32_t kpg_size) {
+void
+_hhk_init(ptd_t* ptd, u32_t kpg_size)
+{

 
     // 初始化 kpg 全为0
     //      P.s. 真没想到GRUB会在这里留下一堆垃圾！ 老子的页表全乱套了！
 
     // 初始化 kpg 全为0
     //      P.s. 真没想到GRUB会在这里留下一堆垃圾！ 老子的页表全乱套了！

-    uint8_t* kpg = (uint8_t*) ptd;
-    for (uint32_t i = 0; i < kpg_size; i++)
-    {
+    uint8_t* kpg = (uint8_t*)ptd;
+    for (u32_t i = 0; i < kpg_size; i++) {

         *(kpg + i) = 0;
     }
         *(kpg + i) = 0;
     }

-    
+

     _init_page(ptd);
 }
\ No newline at end of file
     _init_page(ptd);
 }
\ No newline at end of file