X-Git-Url: https://scm.lunaixsky.com/lunaix-os.git/blobdiff_plain/088403ac98acf7991507715d29a282dcba222053..de334342a8a134a7c5b15e175d1c2ff87e6dbb2a:/lunaix-os/kernel/asm/x86/interrupt.S

diff --git a/lunaix-os/kernel/asm/x86/interrupt.S b/lunaix-os/kernel/asm/x86/interrupt.S
index e0cda17..17236f8 100644
--- a/lunaix-os/kernel/asm/x86/interrupt.S
+++ b/lunaix-os/kernel/asm/x86/interrupt.S
@@ -1,19 +1,9 @@
 #define __ASM__
 #include <arch/x86/interrupts.h>
 #include <lunaix/common.h>
+#include <lunaix/syscall.h>
 #define __ASM_INTR_DIAGNOSIS
 
-.macro isr_template vector, no_error_code=1
-    .global _asm_isr\vector
-    .type _asm_isr\vector, @function
-    _asm_isr\vector:
-        .if \no_error_code
-            pushl $0x0
-        .endif
-        pushl $\vector
-        jmp interrupt_wrapper
-.endm
-
 #ifdef __ASM_INTR_DIAGNOSIS
 .section .bss
     .global debug_resv
@@ -21,27 +11,20 @@
         .skip 16
 #endif
 
-.section .text
-    isr_template FAULT_DIVISION_ERROR
-    isr_template FAULT_GENERAL_PROTECTION, no_error_code=0
-    isr_template FAULT_PAGE_FAULT, no_error_code=0
-
-    isr_template LUNAIX_SYS_PANIC
-    isr_template LUNAIX_SYS_CALL
-
-    isr_template APIC_ERROR_IV
-    isr_template APIC_LINT0_IV
-    isr_template APIC_TIMER_IV
-    isr_template APIC_SPIV_IV
-    isr_template RTC_TIMER_IV
-    isr_template PC_KBD_IV
+.section .bss
+    .align 16
+    lo_tmp_stack:
+        .skip 128
+    tmp_stack:
 
+.section .text
+    .global interrupt_wrapper
     interrupt_wrapper:
         /*
-         Stack layout
+         Stack layout (layout of struct isr_param)
     msa:   [ss]
            [esp]
-           eflags
+           eflags     > offset = 48 + 16 = 64
            cs
            eip
            err_code   
@@ -62,6 +45,7 @@
             las: Least Significant Address
             msa: Most Significant Address
         */
+        cld
         pushl %esp
 
         subl $16, %esp
@@ -88,6 +72,12 @@
         movw %ax, %ds
         movw %ax, %es
 
+        # 保存用户栈顶指针。这是因为我们允许系统调用内进行上下文切换，而这样一来，我们就失去了用户栈的信息，
+        # 这样一来，就无法设置信号上下文。这主要是为了实现了pause()而做的准备
+        movl (__current), %eax  
+        movl 68(%esp), %ebx     # 取出esp
+        movl %ebx, 84(%eax)     # 存入__current->ustack_top
+
     1:
         movl %esp, %eax
         andl $0xfffffff0, %esp
@@ -96,9 +86,17 @@
 
         call intr_handler
 
+        movl (%esp), %eax
+
     .global soft_iret
     soft_iret:
-        popl %esp
+        movl %eax, %esp
+
+#ifdef __ASM_INTR_DIAGNOSIS
+        movl %eax, (debug_resv + 8)
+        movl 56(%esp), %eax
+        movl %eax, (debug_resv + 4)
+#endif
 
         popl %eax
         popl %ebx
@@ -117,10 +115,86 @@
 
         addl $8, %esp
 
-#ifdef __ASM_INTR_DIAGNOSIS
         pushl %eax
+#ifdef __ASM_INTR_DIAGNOSIS
         movl 4(%esp), %eax
         movl %eax, debug_resv
-        popl %eax
 #endif
+        # 处理TSS.ESP的一些边界条件。如果是正常iret（即从内核模式*优雅地*退出）
+        # 那么TSS.ESP0应该为iret进行弹栈后，%esp的值。
+        # 所以这里的边界条件是：如返回用户模式，iret会额外弹出8个字节（ss,esp）
+        movl 8(%esp), %eax
+        andl $3, %eax
+        setnz %al
+        shll $3, %eax
+        addl $16, %eax
+        addl %esp, %eax
+        movl %eax, (_tss + 4)
+        popl %eax
         iret
+
+    .global switch_to
+    switch_to:
+        # 约定
+        # arg1: 目标进程PCB地址 (next
+
+        popl %ebx               # next
+        movl __current, %eax    
+        movl 88(%eax), %ecx     # __current->pagetable
+        movl 88(%ebx), %eax     # next->pagetable
+        
+        cmpl %ecx, %eax         # if(next->pagtable != __current->pagetable) {
+        jz 1f
+        movl %eax, %cr3         #   cpu_lcr3(next->pagetable)
+                                # }
+    1:
+        movl %ebx, __current    # __current = next
+
+        # 我们已经处在了新的地址空间，为了避免影响其先前的栈布局
+        # 需要使用一个临时的栈空间
+        movl $tmp_stack, %esp
+        call signal_dispatch    # kernel/signal.c
+
+        test %eax, %eax         # do we have signal to handle?
+        jz 1f
+        jmp handle_signal
+    1:
+        leal 8(%ebx), %eax
+        jmp soft_iret
+
+    .global handle_signal
+    handle_signal:
+        # 注意1：任何对proc_sig的布局改动，都须及时的保证这里的一致性！
+        # 注意2：handle_signal在调用之前，须确保proc_sig已经写入用户栈！
+        leal 8(%eax), %ebx      # arg1 in %eax: addr of proc_sig structure in user stack
+
+        pushl $UDATA_SEG        # proc_sig->prev_context.ss
+        pushl %eax              # esp
+        pushl 64(%ebx)          # proc_sig->prev_context.eflags
+        pushl $UCODE_SEG        # cs
+        pushl $sig_wrapper      # eip for sig wrapper
+
+        movw $UDATA_SEG, %cx    # switch data seg to user mode
+        movw %cx, %es
+        movw %cx, %ds
+        movw %cx, %fs
+        movw %cx, %gs
+
+        iret  
+
+.section .usrtext
+    sig_wrapper:                # in user mode
+        movl %esp, %eax
+        and $0xfffffff0, %esp
+        subl $8, %esp
+        pushl %eax              # Addr to proc_sig structure 
+        pushl 4(%eax)           # proc_sig->sig_num     ---- 16 bytes aligned
+
+        call (%eax)             # invoke signal handler
+
+        # invoke the sigreturn syscall to exit the signal wrapper
+        movl $__SYSCALL_sigreturn, %eax
+        movl 4(%esp), %ebx
+        int $LUNAIX_SYS_CALL    
+
+        ud2                     # never reach!
\ No newline at end of file