X-Git-Url: https://scm.lunaixsky.com/lunaix-os.git/blobdiff_plain/32b9a6d76790c73d3d2d36d9081a2581cc65d184..28c176b668c841a3b7fb093faccf0efa39257603:/lunaix-os/arch/i386/hal/apic.c

diff --git a/lunaix-os/arch/i386/hal/apic.c b/lunaix-os/arch/i386/hal/apic.c
deleted file mode 100644
index 4e2501f..0000000
--- a/lunaix-os/arch/i386/hal/apic.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/**
- * @file apic.c
- * @author Lunaixsky
- * @brief Abstraction for Advanced Programmable Interrupts Controller (APIC)
- * @version 0.1
- * @date 2022-03-06
- *
- * @copyright Copyright (c) 2022
- *
- */
-
-#include "sys/x86_isa.h"
-#include <sys/cpu.h>
-
-#include "sys/apic.h"
-#include <sys/hart.h>
-
-#include <lunaix/mm/mmio.h>
-#include <lunaix/spike.h>
-#include <lunaix/syslog.h>
-
-#include "pic.h"
-
-LOG_MODULE("APIC")
-
-static volatile ptr_t _apic_base;
-
-void
-apic_setup_lvts();
-
-void
-apic_init()
-{
-    // ensure that external interrupt is disabled
-    cpu_disable_interrupt();
-
-    // Make sure the APIC is there
-    //  FUTURE: Use 8259 as fallback
-
-    // FIXME apic abstraction as local interrupt controller
-    // assert_msg(cpu_has_apic(), "No APIC detected!");
-
-    // As we are going to use APIC, disable the old 8259 PIC
-    pic_disable();
-
-    _apic_base = (ptr_t)ioremap(__APIC_BASE_PADDR, 4096);
-
-    // Hardware enable the APIC
-    // By setting bit 11 of IA32_APIC_BASE register
-    // Note: After this point, you can't disable then re-enable it until a
-    // reset (i.e., reboot)
-    asm volatile("movl %0, %%ecx\n"
-                 "rdmsr\n"
-                 "orl %1, %%eax\n"
-                 "wrmsr\n" ::"i"(IA32_MSR_APIC_BASE),
-                 "i"(IA32_APIC_ENABLE)
-                 : "eax", "ecx", "edx");
-
-    // Print the basic information of our current local APIC
-    u32_t apic_id = apic_read_reg(APIC_IDR) >> 24;
-    u32_t apic_ver = apic_read_reg(APIC_VER);
-
-    kprintf(KINFO "ID: %x, Version: %x, Max LVT: %u",
-            apic_id,
-            apic_ver & 0xff,
-            (apic_ver >> 16) & 0xff);
-
-    // initialize the local vector table (LVT)
-    apic_setup_lvts();
-
-    // initialize priority registers
-
-    // set the task priority to the lowest possible, so all external interrupts
-    // are acceptable
-    //   Note, the lowest possible priority class is 2, not 0, 1, as they are
-    //   reserved for internal interrupts (vector 0-31, and each p-class
-    //   resposible for 16 vectors). See Intel Manual Vol. 3A, 10-29
-    apic_write_reg(APIC_TPR, APIC_PRIORITY(2, 0));
-
-    // enable APIC
-    u32_t spiv = apic_read_reg(APIC_SPIVR);
-
-    // install our handler for spurious interrupt.
-    spiv = (spiv & ~0xff) | APIC_SPIV_APIC_ENABLE | APIC_SPIV_IV;
-    apic_write_reg(APIC_SPIVR, spiv);
-}
-
-#define LVT_ENTRY_LINT0(vector) (LVT_DELIVERY_FIXED | vector)
-
-// Pin LINT#1 is configured for relaying NMI, but we masked it here as I think
-//  it is too early for that
-// LINT#1 *must* be edge trigged (Intel manual vol3. 10-14)
-#define LVT_ENTRY_LINT1 (LVT_DELIVERY_NMI | LVT_MASKED | LVT_TRIGGER_EDGE)
-#define LVT_ENTRY_ERROR(vector) (LVT_DELIVERY_FIXED | vector)
-
-void
-apic_setup_lvts()
-{
-    apic_write_reg(APIC_LVT_LINT0, LVT_ENTRY_LINT0(APIC_LINT0_IV));
-    apic_write_reg(APIC_LVT_LINT1, LVT_ENTRY_LINT1);
-    apic_write_reg(APIC_LVT_ERROR, LVT_ENTRY_ERROR(APIC_ERROR_IV));
-}
-
-void
-apic_on_eoi(struct x86_intc* intc_ctx, cpu_t cpu, int iv)
-{
-    // for all external interrupts except the spurious interrupt
-    //  this is required by Intel Manual Vol.3A, section 10.8.1 & 10.8.5
-    if (iv >= IV_EX_BEGIN && iv != APIC_SPIV_IV) {
-        *(unsigned int*)(_apic_base + APIC_EOI) = 0;
-    }
-}
-
-unsigned int
-apic_read_reg(unsigned int reg)
-{
-    return *(unsigned int*)(_apic_base + (reg));
-}
-
-void
-apic_write_reg(unsigned int reg, unsigned int val)
-{
-    *(unsigned int*)(_apic_base + reg) = val;
-}
\ No newline at end of file