X-Git-Url: https://scm.lunaixsky.com/lunaix-os.git/blobdiff_plain/4c6d990440cdba6c7dd294adb7e435770ffcbcc4..14b86eca7f36eedde35cb47b41afc36f9097ea7c:/lunaix-os/kernel/k_init.c

diff --git a/lunaix-os/kernel/k_init.c b/lunaix-os/kernel/k_init.c
index 444aab0..eee475f 100644
--- a/lunaix-os/kernel/k_init.c
+++ b/lunaix-os/kernel/k_init.c
@@ -1,120 +1,212 @@
-#include <lunaix/constants.h>
+#include <lunaix/common.h>
 #include <lunaix/tty/tty.h>
 
+#include <lunaix/clock.h>
+#include <lunaix/mm/kalloc.h>
 #include <lunaix/mm/page.h>
 #include <lunaix/mm/pmm.h>
 #include <lunaix/mm/vmm.h>
-#include <lunaix/mm/kalloc.h>
+#include <lunaix/process.h>
+#include <lunaix/sched.h>
 #include <lunaix/spike.h>
+#include <lunaix/syslog.h>
+#include <lunaix/timer.h>
+
+#include <hal/rtc.h>
 
 #include <arch/x86/boot/multiboot.h>
 #include <arch/x86/idt.h>
+#include <arch/x86/interrupts.h>
 
-#include <libc/stdio.h>
+#include <klibc/stdio.h>
+#include <klibc/string.h>
 
-#include <stdint.h>
 #include <stddef.h>
-
+#include <stdint.h>
 
 extern uint8_t __kernel_start;
 extern uint8_t __kernel_end;
 extern uint8_t __init_hhk_end;
 
+#define PP_KERN_SHARED (PP_FGSHARED | PP_TKERN)
+
+// Set remotely by kernel/asm/x86/prologue.S
+multiboot_info_t* _k_init_mb_info;
+
+x86_page_table* __kernel_ptd;
+
+struct proc_info tmp;
+
+LOG_MODULE("BOOT");
+
+extern void
+__proc0(); /* proc0.c */
+
 void
-setup_memory(multiboot_memory_map_t* map, size_t map_size);
+spawn_proc0();
 
 void
-setup_kernel_runtime();
+setup_memory(multiboot_memory_map_t* map, size_t map_size);
 
 void
-_kernel_pre_init(multiboot_info_t* mb_info) {
+_kernel_pre_init()
+{
     _init_idt();
+    intr_routine_init();
 
-    pmm_init(MEM_1MB + (mb_info->mem_upper << 10));
+    pmm_init(MEM_1MB + (_k_init_mb_info->mem_upper << 10));
     vmm_init();
+    rtc_init();
 
     tty_init((void*)VGA_BUFFER_PADDR);
-    tty_set_theme(VGA_COLOR_GREEN, VGA_COLOR_BLACK);
-}
+    tty_set_theme(VGA_COLOR_WHITE, VGA_COLOR_BLACK);
 
-void
-_kernel_init(multiboot_info_t* mb_info) {
-    printf("[KERNEL] === Initialization === \n");
+    __kernel_ptd = cpu_rcr3();
 
-    printf("[MM] Mem: %d KiB, Extended Mem: %d KiB\n",
-           mb_info->mem_lower,
-           mb_info->mem_upper);
+    tmp = (struct proc_info){ .page_table = __kernel_ptd };
 
-    unsigned int map_size = mb_info->mmap_length / sizeof(multiboot_memory_map_t);
-    setup_memory((multiboot_memory_map_t*)mb_info->mmap_addr, map_size);
-    setup_kernel_runtime();
+    __current = &tmp;
 }
 
-void 
-_kernel_post_init() {
-    printf("[KERNEL] === Post Initialization === \n");
-    size_t hhk_init_pg_count = ((uintptr_t)(&__init_hhk_end)) >> PG_SIZE_BITS;
-    printf("[MM] Releaseing %d pages from 0x0.\n", hhk_init_pg_count);
+void
+_kernel_init()
+{
+    kprintf("[MM] Mem: %d KiB, Extended Mem: %d KiB\n",
+            _k_init_mb_info->mem_lower,
+            _k_init_mb_info->mem_upper);
 
-    // 清除 hhk_init 与前1MiB的映射
-    for (size_t i = 0; i < hhk_init_pg_count; i++) {
-        vmm_unmap_page((void*)(i << PG_SIZE_BITS));
+    unsigned int map_size =
+      _k_init_mb_info->mmap_length / sizeof(multiboot_memory_map_t);
+
+    setup_memory((multiboot_memory_map_t*)_k_init_mb_info->mmap_addr, map_size);
+
+    // 为内核创建一个专属栈空间。
+    for (size_t i = 0; i < (KSTACK_SIZE >> PG_SIZE_BITS); i++) {
+        vmm_alloc_page(KERNEL_PID,
+                       (void*)(KSTACK_START + (i << PG_SIZE_BITS)),
+                       NULL,
+                       PG_PREM_RW,
+                       0);
     }
+    kprintf(KINFO "[MM] Allocated %d pages for stack start at %p\n",
+            KSTACK_SIZE >> PG_SIZE_BITS,
+            KSTACK_START);
+
+    sched_init();
 
-    assert_msg(kalloc_init(), "Fail to initialize heap");
+    spawn_proc0();
+}
+
+/**
+ * @brief 创建并运行proc0进程
+ *
+ */
+void
+spawn_proc0()
+{
+    struct proc_info proc0;
+
+    /**
+     * @brief
+     * 注意：这里和视频中说的不一样，属于我之后的一点微调。
+     * 在视频中，spawn_proc0是在_kernel_post_init的末尾才调用的。并且是直接跳转到_proc0
+     *
+     * 但是我后来发现，上述的方法会产生竞态条件。这是因为spawn_proc0被调用的时候，时钟中断已经开启，
+     * 而中断的产生会打乱栈的布局，从而使得下面的上下文设置代码产生未定义行为（Undefined
+     * Behaviour）。 为了保险起见，有两种办法：
+     *      1. 在创建proc0进程前关闭中断
+     *      2. 将_kernel_post_init搬进proc0进程
+     * （_kernel_post_init已经更名为init_platform）
+     *
+     * 目前的解决方案是两者都使用
+     */
+
+    init_proc(&proc0);
+    proc0.intr_ctx = (isr_param){ .registers.esp = KSTACK_TOP - 20,
+                                  .cs = KCODE_SEG,
+                                  .eip = (void*)__proc0,
+                                  .ss = KDATA_SEG,
+                                  .eflags = cpu_reflags() };
+
+    // 必须在读取eflags之后禁用。否则当进程被调度时，中断依然是关闭的！
+    cpu_disable_interrupt();
+    setup_proc_mem(&proc0, PD_REFERENCED);
+
+    // Ok... 首先fork进我们的零号进程，而后由那里，我们fork进init进程。
+    /*
+        这里是一些栈的设置，因为我们将切换到一个新的地址空间里，并且使用一个全新的栈。
+        让iret满意！
+    */
+    asm volatile("movl %%cr3, %%eax\n"
+                 "movl %%esp, %%ebx\n"
+                 "movl %0, %%cr3\n"
+                 "movl %1, %%esp\n"
+                 "pushf\n"
+                 "pushl %2\n"
+                 "pushl %3\n"
+                 "pushl $0\n"
+                 "pushl $0\n"
+                 "movl %%eax, %%cr3\n"
+                 "movl %%ebx, %%esp\n" ::"r"(proc0.page_table),
+                 "i"(KSTACK_TOP),
+                 "i"(KCODE_SEG),
+                 "r"(proc0.intr_ctx.eip)
+                 : "%eax", "%ebx", "memory");
+
+    // 向调度器注册进程。
+    push_process(&proc0);
+
+    // 由于时钟中断未就绪，我们需要手动通知调度器进行第一次调度。这里也会同时隐式地恢复我们的eflags.IF位
+    schedule();
+
+    /* Should not return */
+    assert_msg(0, "Unexpected Return");
 }
 
 // 按照 Memory map 标识可用的物理页
 void
-setup_memory(multiboot_memory_map_t* map, size_t map_size) {
+setup_memory(multiboot_memory_map_t* map, size_t map_size)
+{
+
+    // First pass, to mark the physical pages
     for (unsigned int i = 0; i < map_size; i++) {
         multiboot_memory_map_t mmap = map[i];
-        printf("[MM] Base: 0x%x, len: %u KiB, type: %u\n",
-               map[i].addr_low,
-               map[i].len_low >> 10,
-               map[i].type);
+        kprintf("[MM] Base: 0x%x, len: %u KiB, type: %u\n",
+                map[i].addr_low,
+                map[i].len_low >> 10,
+                map[i].type);
         if (mmap.type == MULTIBOOT_MEMORY_AVAILABLE) {
             // 整数向上取整除法
             uintptr_t pg = map[i].addr_low + 0x0fffU;
-            pmm_mark_chunk_free(pg >> PG_SIZE_BITS, map[i].len_low >> PG_SIZE_BITS);
-            printf("[MM] Freed %u pages start from 0x%x\n",
-                   map[i].len_low >> PG_SIZE_BITS,
-                   pg & ~0x0fffU);
+            pmm_mark_chunk_free(pg >> PG_SIZE_BITS,
+                                map[i].len_low >> PG_SIZE_BITS);
+            kprintf(KINFO "[MM] Freed %u pages start from 0x%x\n",
+                    map[i].len_low >> PG_SIZE_BITS,
+                    pg & ~0x0fffU);
         }
     }
 
-    // 将内核占据的页设为已占用
-    size_t pg_count = (uintptr_t)(&__kernel_end - &__kernel_start) >> PG_SIZE_BITS;
-    pmm_mark_chunk_occupied(V2P(&__kernel_start) >> PG_SIZE_BITS, pg_count);
-    printf("[MM] Allocated %d pages for kernel.\n", pg_count);
-
+    // 将内核占据的页，包括前1MB，hhk_init 设为已占用
+    size_t pg_count = V2P(&__kernel_end) >> PG_SIZE_BITS;
+    pmm_mark_chunk_occupied(KERNEL_PID, 0, pg_count, 0);
+    kprintf(KINFO "[MM] Allocated %d pages for kernel.\n", pg_count);
 
     size_t vga_buf_pgs = VGA_BUFFER_SIZE >> PG_SIZE_BITS;
-    
+
     // 首先，标记VGA部分为已占用
-    pmm_mark_chunk_occupied(VGA_BUFFER_PADDR >> PG_SIZE_BITS, vga_buf_pgs);
-    
+    pmm_mark_chunk_occupied(
+      KERNEL_PID, VGA_BUFFER_PADDR >> PG_SIZE_BITS, vga_buf_pgs, 0);
+
     // 重映射VGA文本缓冲区（以后会变成显存，i.e., framebuffer）
-    for (size_t i = 0; i < vga_buf_pgs; i++)
-    {
-        vmm_map_page(
-            (void*)(VGA_BUFFER_VADDR + (i << PG_SIZE_BITS)), 
-            (void*)(VGA_BUFFER_PADDR + (i << PG_SIZE_BITS)), 
-            PG_PREM_RW
-        );
+    for (size_t i = 0; i < vga_buf_pgs; i++) {
+        vmm_map_page(KERNEL_PID,
+                     (void*)(VGA_BUFFER_VADDR + (i << PG_SIZE_BITS)),
+                     (void*)(VGA_BUFFER_PADDR + (i << PG_SIZE_BITS)),
+                     PG_PREM_URW);
     }
-    
+
     // 更新VGA缓冲区位置至虚拟地址
     tty_set_buffer((void*)VGA_BUFFER_VADDR);
 
-    printf("[MM] Mapped VGA to %p.\n", VGA_BUFFER_VADDR);
+    kprintf(KINFO "[MM] Mapped VGA to %p.\n", VGA_BUFFER_VADDR);
 }
-
-void
-setup_kernel_runtime() {
-    // 为内核创建一个专属栈空间。
-    for (size_t i = 0; i < (K_STACK_SIZE >> PG_SIZE_BITS); i++) {
-        vmm_alloc_page((void*)(K_STACK_START + (i << PG_SIZE_BITS)), PG_PREM_RW);
-    }
-    printf("[MM] Allocated %d pages for stack start at %p\n", K_STACK_SIZE>>PG_SIZE_BITS, K_STACK_START);
-}
\ No newline at end of file