X-Git-Url: https://scm.lunaixsky.com/lunaix-os.git/blobdiff_plain/c4510182f3c02e390184bee518940e325f064b20..17fe1418db474b23d9f516db049772dfe3d8696c:/lunaix-os/kernel/peripheral/ps2kbd.c

diff --git a/lunaix-os/kernel/peripheral/ps2kbd.c b/lunaix-os/kernel/peripheral/ps2kbd.c
index 04debc8..83ad357 100644
--- a/lunaix-os/kernel/peripheral/ps2kbd.c
+++ b/lunaix-os/kernel/peripheral/ps2kbd.c
@@ -3,6 +3,7 @@
 #include <lunaix/clock.h>
 #include <lunaix/common.h>
 #include <lunaix/input.h>
+#include <lunaix/isrm.h>
 #include <lunaix/peripheral/ps2kbd.h>
 #include <lunaix/syslog.h>
 #include <lunaix/timer.h>
@@ -15,7 +16,7 @@
 
 #define PS2_DEV_CMD_MAX_ATTEMPTS 5
 
-LOG_MODULE("PS2KBD");
+LOG_MODULE("i8042");
 
 static struct ps2_cmd_queue cmd_q;
 static struct ps2_kbd_state kbd_state;
@@ -85,6 +86,9 @@ static struct input_device* kbd_idev;
 void
 intr_ps2_kbd_handler(const isr_param* param);
 
+static uint8_t
+ps2_issue_cmd_wretry(char cmd, uint16_t arg);
+
 void
 ps2_device_post_cmd(char cmd, char arg)
 {
@@ -135,13 +139,13 @@ ps2_kbd_init()
          *      https://bochs.sourceforge.io/cgi-bin/lxr/source/bios/rombios32.c#L1314
          */
         if (!(acpi_ctx->fadt.boot_arch & IAPC_ARCH_8042)) {
-            kprintf(KERROR "i8042: not found\n");
+            kprintf(KERROR "not found\n");
             // FUTURE: Some alternative fallback on this? Check PCI bus for USB
             // controller instead?
             return;
         }
     } else {
-        kprintf(KWARN "i8042: outdated FADT used, assuming exists.\n");
+        kprintf(KWARN "outdated FADT used, assuming exists.\n");
     }
 
     char result;
@@ -157,34 +161,34 @@ ps2_kbd_init()
 
     // 3、屏蔽所有PS/2设备（端口1&2）IRQ，并且禁用键盘键码转换功能
     result = ps2_issue_cmd(PS2_CMD_READ_CFG, PS2_NO_ARG);
-    result = result & ~(PS2_CFG_P1INT | PS2_CFG_P2INT | PS2_CFG_TRANSLATION);
+    result = result & ~(PS2_CFG_P1INT | PS2_CFG_P2INT);
     ps2_post_cmd(PS2_PORT_CTRL_CMDREG, PS2_CMD_WRITE_CFG, result);
 
     // 4、控制器自检
-    result = ps2_issue_cmd(PS2_CMD_SELFTEST, PS2_NO_ARG);
+    result = ps2_issue_cmd_wretry(PS2_CMD_SELFTEST, PS2_NO_ARG);
     if (result != PS2_RESULT_TEST_OK) {
-        kprintf(KERROR "Controller self-test failed.");
-        goto done;
+        kprintf(KWARN "controller self-test failed. (%x)\n", result);
+        // goto done;
     }
 
     // 5、设备自检（端口1自检，通常是我们的键盘）
-    result = ps2_issue_cmd(PS2_CMD_SELFTEST_PORT1, PS2_NO_ARG);
+    result = ps2_issue_cmd_wretry(PS2_CMD_SELFTEST_PORT1, PS2_NO_ARG);
     if (result != 0) {
-        kprintf(KERROR "Interface test on port 1 failed.");
-        goto done;
+        kprintf(KERROR "interface test on port 1 failed. (%x)\n", result);
+        // goto done;
     }
 
+    ps2_post_cmd(PS2_PORT_CTRL_CMDREG, PS2_CMD_PORT2_DISABLE, PS2_NO_ARG);
+
     // 6、开启位于端口1的 IRQ，并启用端口1。不用理会端口2，那儿一般是鼠标。
     ps2_post_cmd(PS2_PORT_CTRL_CMDREG, PS2_CMD_PORT1_ENABLE, PS2_NO_ARG);
     result = ps2_issue_cmd(PS2_CMD_READ_CFG, PS2_NO_ARG);
-    result = result | PS2_CFG_P1INT;
+    // 重新设置配置字节，因为控制器自检有可能重置我们先前做的改动。
+    result = (result | PS2_CFG_P1INT) & ~(PS2_CFG_TRANSLATION | PS2_CFG_P2INT);
     ps2_post_cmd(PS2_PORT_CTRL_CMDREG, PS2_CMD_WRITE_CFG, result);
 
     // 至此，PS/2控制器和设备已完成初始化，可以正常使用。
 
-    // 将我们的键盘驱动挂载到第204号中断上（已由IOAPIC映射至IRQ#1），
-    intr_subscribe(PC_KBD_IV, intr_ps2_kbd_handler);
-
     // 搞一个计时器，将我们的 ps2_process_cmd
     // 挂上去。每隔5毫秒执行排在队头的命令。
     //  为什么只执行队头的命令，而不是全部的命令？
@@ -201,8 +205,7 @@ ps2_kbd_init()
      *
      *  所以，保险的方法是：在初始化后才去设置ioapic，这样一来我们就能有一个稳定的IRQ#1以放心使用。
      */
-    uint8_t irq_kbd = ioapic_get_irq(acpi_ctx, PC_AT_IRQ_KBD);
-    ioapic_redirect(irq_kbd, PC_KBD_IV, 0, IOAPIC_DELMOD_FIXED);
+    isrm_bindirq(PC_AT_IRQ_KBD, intr_ps2_kbd_handler);
 
 done:
     cpu_enable_interrupt();
@@ -241,7 +244,6 @@ ps2_process_cmd(void* arg)
 #endif
         attempts++;
     } while (result == PS2_RESULT_NAK && attempts < PS2_DEV_CMD_MAX_ATTEMPTS);
-
     // XXX: 是否需要处理不成功的指令？
 
     cmd_q.queue_ptr = (cmd_q.queue_ptr + 1) % PS2_CMD_QUEUE_SIZE;
@@ -274,11 +276,11 @@ kbd_buffer_key_event(kbd_keycode_t key, uint8_t scancode, kbd_kstate_t state)
         key = key & (0xffdf |
                      -('a' > key || key > 'z' || !(state & KBD_KEY_FCAPSLKED)));
 
-        struct input_evt_pkt ipkt = {
-            .pkt_type = (state & KBD_KEY_FPRESSED) ? PKT_PRESS : PKT_RELEASE,
-            .scan_code = scancode,
-            .sys_code = key,
-        };
+        struct input_evt_pkt ipkt = { .pkt_type = (state & KBD_KEY_FPRESSED)
+                                                    ? PKT_PRESS
+                                                    : PKT_RELEASE,
+                                      .scan_code = scancode,
+                                      .sys_code = (state << 16) | key };
 
         input_fire_event(kbd_idev, &ipkt);
 
@@ -297,8 +299,8 @@ intr_ps2_kbd_handler(const isr_param* param)
 {
 
     // This is important! Don't believe me? try comment it out and run on Bochs!
-    while (!(io_inb(PS2_PORT_CTRL_STATUS) & PS2_STATUS_OFULL))
-        ;
+    // while (!(io_inb(PS2_PORT_CTRL_STATUS) & PS2_STATUS_OFULL))
+    //    ;
 
     // I know you are tempting to move this chunk after the keyboard state
     // check. But DO NOT. This chunk is in right place and right order. Moving
@@ -414,6 +416,19 @@ ps2_issue_cmd(char cmd, uint16_t arg)
     return io_inb(PS2_PORT_ENC_CMDREG);
 }
 
+static uint8_t
+ps2_issue_cmd_wretry(char cmd, uint16_t arg)
+{
+    uint8_t r, c = 0;
+    while ((r = ps2_issue_cmd(cmd, arg)) == PS2_RESULT_NAK && c < 5) {
+        c++;
+    }
+    if (c >= 5) {
+        kprintf(KWARN "max attempt reached.\n");
+    }
+    return r;
+}
+
 static void
 ps2_post_cmd(uint8_t port, char cmd, uint16_t arg)
 {
@@ -426,6 +441,8 @@ ps2_post_cmd(uint8_t port, char cmd, uint16_t arg)
 
     if (!(arg & PS2_NO_ARG)) {
         // 所有参数一律通过0x60传入。
+        while (io_inb(PS2_PORT_CTRL_STATUS) & PS2_STATUS_IFULL)
+            ;
         io_outb(PS2_PORT_ENC_CMDREG, (uint8_t)(arg & 0x00ff));
         io_delay(PS2_DELAY);
     }