X-Git-Url: https://scm.lunaixsky.com/lunaix-os.git/blobdiff_plain/d251b620d312e819923e55e223e0eb43b72a3bc6..8fdcd1575a97862975fa019f09c00453a2a7d8bb:/lunaix-os/kernel/k_init.c

diff --git a/lunaix-os/kernel/k_init.c b/lunaix-os/kernel/k_init.c
index 7600caf..257112e 100644
--- a/lunaix-os/kernel/k_init.c
+++ b/lunaix-os/kernel/k_init.c
@@ -80,15 +80,6 @@ _kernel_init()
 
     setup_memory((multiboot_memory_map_t*)_k_init_mb_info->mmap_addr, map_size);
 
-    // 为内核创建一个专属栈空间。
-    for (size_t i = 0; i < (KSTACK_SIZE >> PG_SIZE_BITS); i++) {
-        uintptr_t pa = pmm_alloc_page(KERNEL_PID, 0);
-        vmm_set_mapping(PD_REFERENCED,
-                        KSTACK_START + (i << PG_SIZE_BITS),
-                        pa,
-                        PG_PREM_RW,
-                        VMAP_NULL);
-    }
     kprintf(KINFO "[MM] Allocated %d pages for stack start at %p\n",
             KSTACK_SIZE >> PG_SIZE_BITS,
             KSTACK_START);
@@ -105,7 +96,7 @@ _kernel_init()
 void
 spawn_proc0()
 {
-    struct proc_info proc0;
+    struct proc_info* proc0 = alloc_process();
 
     /**
      * @brief
@@ -122,55 +113,65 @@ spawn_proc0()
      * 目前的解决方案是2
      */
 
-    init_proc(&proc0);
-    proc0.intr_ctx = (isr_param){ .registers = { .ds = KDATA_SEG,
-                                                 .es = KDATA_SEG,
-                                                 .fs = KDATA_SEG,
-                                                 .gs = KDATA_SEG },
-                                  .cs = KCODE_SEG,
-                                  .eip = (void*)__proc0,
-                                  .ss = KDATA_SEG,
-                                  .eflags = cpu_reflags() };
+    proc0->intr_ctx = (isr_param){ .registers = { .ds = KDATA_SEG,
+                                                  .es = KDATA_SEG,
+                                                  .fs = KDATA_SEG,
+                                                  .gs = KDATA_SEG },
+                                   .cs = KCODE_SEG,
+                                   .eip = (void*)__proc0,
+                                   .ss = KDATA_SEG,
+                                   .eflags = cpu_reflags() };
 
     // 方案1：必须在读取eflags之后禁用。否则当进程被调度时，中断依然是关闭的！
     // cpu_disable_interrupt();
 
-    setup_proc_mem(&proc0, PD_REFERENCED);
-
-    // Ok... 首先fork进我们的零号进程，而后由那里，我们fork进init进程。
-    /*
-        这里是一些栈的设置，因为我们将切换到一个新的地址空间里，并且使用一个全新的栈。
-        让iret满意！
-    */
-    asm volatile("movl %%cr3, %%eax\n"
-                 "movl %%esp, %%ebx\n"
-                 "movl %1, %%cr3\n"
-                 "movl %2, %%esp\n"
+    /* Ok... 首先fork进我们的零号进程，而后由那里，我们fork进init进程。 */
+
+    // 把当前虚拟地址空间（内核）复制一份。
+    proc0->page_table = vmm_dup_vmspace(proc0->pid);
+
+    // 直接切换到新的拷贝，进行配置。
+    cpu_lcr3(proc0->page_table);
+
+    // 为内核创建一个专属栈空间。
+    for (size_t i = 0; i < (KSTACK_SIZE >> PG_SIZE_BITS); i++) {
+        uintptr_t pa = pmm_alloc_page(KERNEL_PID, 0);
+        vmm_set_mapping(PD_REFERENCED,
+                        KSTACK_START + (i << PG_SIZE_BITS),
+                        pa,
+                        PG_PREM_RW,
+                        VMAP_NULL);
+    }
+
+    // 手动设置进程上下文：用于第一次调度
+    asm volatile("movl %%esp, %%ebx\n"
+                 "movl %1, %%esp\n"
                  "pushf\n"
+                 "pushl %2\n"
                  "pushl %3\n"
-                 "pushl %4\n"
                  "pushl $0\n"
                  "pushl $0\n"
                  "movl %%esp, %0\n"
-                 "movl %%eax, %%cr3\n"
                  "movl %%ebx, %%esp\n"
-                 : "=m"(proc0.intr_ctx.registers.esp)
-                 : "r"(proc0.page_table),
-                   "i"(KSTACK_TOP),
-                   "i"(KCODE_SEG),
-                   "r"(proc0.intr_ctx.eip)
-                 : "%eax", "%ebx", "memory");
+                 : "=m"(proc0->intr_ctx.registers.esp)
+                 : "i"(KSTACK_TOP), "i"(KCODE_SEG), "r"(proc0->intr_ctx.eip)
+                 : "%ebx", "memory");
 
     // 向调度器注册进程。
-    push_process(&proc0);
+    commit_process(proc0);
 
-    // 由于时钟中断未就绪，我们需要手动通知调度器进行第一次调度。这里也会同时隐式地恢复我们的eflags.IF位
-    schedule();
+    // 由于时钟中断与APIC未就绪，我们需要手动进行第一次调度。这里也会同时隐式地恢复我们的eflags.IF位
+    proc0->state = PROC_RUNNING;
+    asm volatile("pushl %0\n"
+                 "jmp switch_to\n" ::"r"(proc0));
 
     /* Should not return */
     assert_msg(0, "Unexpected Return");
 }
 
+extern void __usrtext_start;
+extern void __usrtext_end;
+
 // 按照 Memory map 标识可用的物理页
 void
 setup_memory(multiboot_memory_map_t* map, size_t map_size)
@@ -214,6 +215,14 @@ setup_memory(multiboot_memory_map_t* map, size_t map_size)
                         VMAP_NULL);
     }
 
+    assert_msg(!((uintptr_t)&__usrtext_start & 0xfff) &&
+                 !((uintptr_t)&__usrtext_end & 0xfff),
+               "Bad usrtext alignment");
+
+    for (uintptr_t i = &__usrtext_start; i < &__usrtext_end; i += PG_SIZE) {
+        vmm_set_mapping(PD_REFERENCED, i, V2P(i), PG_PREM_UR, VMAP_NULL);
+    }
+
     // 更新VGA缓冲区位置至虚拟地址
     tty_set_buffer((void*)VGA_BUFFER_VADDR);