X-Git-Url: https://scm.lunaixsky.com/lunaix-os.git/blobdiff_plain/eb037efe9f30ae166684e99146024abf8740984d..9a7a9c079d0ab0366673beff73ffa710fe3b76c8:/lunaix-os/hal/ahci/ata.c

diff --git a/lunaix-os/hal/ahci/ata.c b/lunaix-os/hal/ahci/ata.c
index ea2e5f3..845f420 100644
--- a/lunaix-os/hal/ahci/ata.c
+++ b/lunaix-os/hal/ahci/ata.c
@@ -1,11 +1,22 @@
+#include <hal/ahci/ahci.h>
 #include <hal/ahci/hba.h>
 #include <hal/ahci/sata.h>
 
 #include <lunaix/mm/valloc.h>
+#include <lunaix/mm/vmm.h>
 #include <lunaix/spike.h>
 
+void
+sata_read_error(struct hba_port* port)
+{
+    uint32_t tfd = port->regs[HBA_RPxTFD];
+    port->device->last_result.sense_key = (tfd & 0xf000) >> 12;
+    port->device->last_result.error = (tfd & 0x0f00) >> 8;
+    port->device->last_result.status = tfd & 0x00ff;
+}
+
 int
-__sata_buffer_io(struct hba_port* port,
+__sata_buffer_io(struct hba_device* dev,
                  uint64_t lba,
                  void* buffer,
                  uint32_t size,
@@ -13,29 +24,16 @@ __sata_buffer_io(struct hba_port* port,
 {
     assert_msg(((uintptr_t)buffer & 0x3) == 0, "HBA: Bad buffer alignment");
 
+    struct hba_port* port = dev->port;
     struct hba_cmdh* header;
     struct hba_cmdt* table;
-    int slot = hba_alloc_slot(port, &table, &header, 0);
-    int bitmask = 1 << slot;
-
-    // 确保端口是空闲的
-    wait_until(!(port->regs[HBA_RPxTFD] & (HBA_PxTFD_BSY)));
-
-    port->regs[HBA_RPxIS] = 0;
+    int slot = hba_prepare_cmd(port, &table, &header, buffer, size);
 
-    table->entries[0] =
-      (struct hba_prdte){ .byte_count = size - 1, .data_base = buffer };
-    header->prdt_len = 1;
     header->options |= HBA_CMDH_WRITE * (write == 1);
 
-    uint16_t count = size / port->device->block_size;
-    if (count == 0 && size < port->device->block_size) {
-        // 一个special case: 当count=0的时候，表示的是65536个区块会被传输
-        // 如果这个0是因为不够除而导致的，那么说明size太小了
-        goto fail;
-    }
+    uint16_t count = ICEIL(size, port->device->block_size);
+    struct sata_reg_fis* fis = (struct sata_reg_fis*)table->command_fis;
 
-    struct sata_reg_fis* fis = table->command_fis;
     if ((port->device->flags & HBA_DEV_FEXTLBA)) {
         // 如果该设备支持48位LBA寻址
         sata_create_fis(
@@ -43,46 +41,37 @@ __sata_buffer_io(struct hba_port* port,
     } else {
         sata_create_fis(fis, write ? ATA_WRITE_DMA : ATA_READ_DMA, lba, count);
     }
+    /*
+          确保我们使用的是LBA寻址模式
+          注意：在ACS-3中（甚至在ACS-4），只有在(READ/WRITE)_DMA_EXT指令中明确注明了需要将这一位置位
+        而并没有在(READ/WRITE)_DMA注明。
+          但是这在ACS-2中是有的！于是这也就导致了先前的测试中，LBA=0根本无法访问，因为此时
+        的访问模式是在CHS下，也就是说LBA=0 => Sector=0，是非法的。
+          所以，我猜测，这要么是QEMU/VirtualBox根据ACS-2来编写的AHCI模拟，
+        要么是标准出错了（毕竟是working draft）
+    */
+    fis->dev = (1 << 6);
+
+    int is_ok = ahci_try_send(port, slot);
 
-    port->regs[HBA_RPxCI] = bitmask;
-
-    wait_until(!(port->regs[HBA_RPxCI] & bitmask));
-
-    if ((port->regs[HBA_RPxTFD] & HBA_PxTFD_ERR)) {
-        // 有错误
-        sata_read_error(port);
-        goto fail;
-    }
-
-    vfree_dma(table);
-    return 1;
-
-fail:
     vfree_dma(table);
-    return 0;
+    return is_ok;
 }
 
 int
-sata_read_buffer(struct hba_port* port,
+sata_read_buffer(struct hba_device* dev,
                  uint64_t lba,
                  void* buffer,
                  uint32_t size)
 {
-    return __sata_buffer_io(port, lba, buffer, size, 0);
+    return __sata_buffer_io(dev, lba, buffer, size, 0);
 }
 
 int
-sata_write_buffer(struct hba_port* port,
+sata_write_buffer(struct hba_device* dev,
                   uint64_t lba,
                   void* buffer,
                   uint32_t size)
 {
-    return __sata_buffer_io(port, lba, buffer, size, 1);
+    return __sata_buffer_io(dev, lba, buffer, size, 1);
 }
-
-void
-sata_read_error(struct hba_port* port)
-{
-    uint32_t tfd = port->regs[HBA_RPxTFD];
-    port->device->last_error = (tfd >> 8) & 0xff;
-}
\ No newline at end of file