X-Git-Url: https://scm.lunaixsky.com/lunaix-os.git/blobdiff_plain/fef29e9e993e62f025d8cbfeb6b8d51588083b7e..946c3fdd31300074cc78841795bd47af908ddddb:/lunaix-os/kernel/k_init.c

diff --git a/lunaix-os/kernel/k_init.c b/lunaix-os/kernel/k_init.c
index 5e6cc99..8c40b6b 100644
--- a/lunaix-os/kernel/k_init.c
+++ b/lunaix-os/kernel/k_init.c
@@ -1,200 +1,209 @@
 #include <lunaix/common.h>
-#include <lunaix/tty/tty.h>
-
+#include <lunaix/device.h>
+#include <lunaix/foptions.h>
+#include <lunaix/input.h>
+#include <lunaix/isrm.h>
+#include <lunaix/lxconsole.h>
+#include <lunaix/mm/cake.h>
+#include <lunaix/mm/mmio.h>
 #include <lunaix/mm/page.h>
 #include <lunaix/mm/pmm.h>
+#include <lunaix/mm/valloc.h>
 #include <lunaix/mm/vmm.h>
-#include <lunaix/mm/kalloc.h>
+#include <lunaix/process.h>
+#include <lunaix/sched.h>
 #include <lunaix/spike.h>
-#include <lunaix/syslog.h>
-#include <lunaix/timer.h>
-
-#include <hal/rtc.h>
-#include <hal/apic.h>
-#include <hal/ioapic.h>
-#include <hal/acpi/acpi.h>
+#include <lunaix/syscall.h>
+#include <lunaix/tty/tty.h>
+#include <lunaix/types.h>
 
 #include <arch/x86/boot/multiboot.h>
 #include <arch/x86/idt.h>
 #include <arch/x86/interrupts.h>
 
 #include <klibc/stdio.h>
+#include <klibc/string.h>
 
-#include <stdint.h>
-#include <stddef.h>
-
-
-extern uint8_t __kernel_start;
-extern uint8_t __kernel_end;
-extern uint8_t __init_hhk_end;
+extern u8_t __kernel_start;
+extern u8_t __kernel_end;
+extern u8_t __init_hhk_end;
 
+#define PP_KERN_SHARED (PP_FGSHARED | PP_TKERN)
 
 // Set remotely by kernel/asm/x86/prologue.S
 multiboot_info_t* _k_init_mb_info;
 
-LOG_MODULE("INIT");
+x86_page_table* __kernel_ptd;
 
-void
-setup_memory(multiboot_memory_map_t* map, size_t map_size);
+extern void
+__proc0(); /* proc0.c */
 
 void
-setup_kernel_runtime();
+spawn_proc0();
 
 void
-lock_reserved_memory();
-
-void
-unlock_reserved_memory();
+setup_memory(multiboot_memory_map_t* map, size_t map_size);
 
 void
-_kernel_pre_init() {
+_kernel_pre_init()
+{
+    // interrupts
     _init_idt();
+    isrm_init();
     intr_routine_init();
 
+    // memory
     pmm_init(MEM_1MB + (_k_init_mb_info->mem_upper << 10));
     vmm_init();
-    rtc_init();
 
-    tty_init((void*)VGA_BUFFER_PADDR);
-    tty_set_theme(VGA_COLOR_WHITE, VGA_COLOR_BLACK);
+    unsigned int map_size =
+      _k_init_mb_info->mmap_length / sizeof(multiboot_memory_map_t);
+
+    setup_memory((multiboot_memory_map_t*)_k_init_mb_info->mmap_addr, map_size);
 }
 
 void
-_kernel_init() {
-    kprintf("[MM] Mem: %d KiB, Extended Mem: %d KiB\n",
-           _k_init_mb_info->mem_lower,
-           _k_init_mb_info->mem_upper);
+_kernel_init()
+{
+    int errno = 0;
 
-    unsigned int map_size = _k_init_mb_info->mmap_length / sizeof(multiboot_memory_map_t);
-    
-    setup_memory((multiboot_memory_map_t*)_k_init_mb_info->mmap_addr, map_size);
+    // allocators
+    cake_init();
+    valloc_init();
 
-    setup_kernel_runtime();
-}
+    sched_init();
 
-void 
-_kernel_post_init() {
-    size_t hhk_init_pg_count = ((uintptr_t)(&__init_hhk_end)) >> PG_SIZE_BITS;
-    kprintf(KINFO "[MM] Releaseing %d pages from 0x0.\n", hhk_init_pg_count);
+    // crt
+    tty_init(ioremap(VGA_FRAMEBUFFER, PG_SIZE));
+    tty_set_theme(VGA_COLOR_WHITE, VGA_COLOR_BLACK);
 
-    // Fuck it, I will no longer bother this little 1MiB
-    // I just release 4 pages for my APIC & IOAPIC remappings
-    for (size_t i = 0; i < 3; i++) {
-        vmm_unmap_page((void*)(i << PG_SIZE_BITS));
-    }
-    
-    // 锁定所有系统预留页（内存映射IO，ACPI之类的），并且进行1:1映射
-    lock_reserved_memory();
+    // file system & device subsys
+    vfs_init();
+    fsm_init();
+    input_init();
 
-    acpi_init(_k_init_mb_info);
-    uintptr_t ioapic_addr = acpi_get_context()->madt.ioapic->ioapic_addr;
+    vfs_export_attributes();
 
-    pmm_mark_page_occupied(FLOOR(__APIC_BASE_PADDR, PG_SIZE_BITS));
-    pmm_mark_page_occupied(FLOOR(ioapic_addr, PG_SIZE_BITS));
+    lxconsole_init();
 
-    vmm_set_mapping(APIC_BASE_VADDR, __APIC_BASE_PADDR, PG_PREM_RW);
-    vmm_set_mapping(IOAPIC_BASE_VADDR, ioapic_addr, PG_PREM_RW);
+    if ((errno = vfs_mount_root("ramfs", NULL))) {
+        panickf("Fail to mount root. (errno=%d)", errno);
+    }
 
-    ioapic_init();
-    apic_init();
-    timer_init(SYS_TIMER_FREQUENCY_HZ);
+    vfs_mount("/dev", "devfs", NULL, 0);
+    vfs_mount("/sys", "twifs", NULL, MNT_RO);
+    vfs_mount("/task", "taskfs", NULL, MNT_RO);
 
-    for (size_t i = 256; i < hhk_init_pg_count; i++) {
-        vmm_unmap_page((void*)(i << PG_SIZE_BITS));
-    }
-}
+    lxconsole_spawn_ttydev();
+    device_init_builtin();
 
-void
-lock_reserved_memory() {
-    multiboot_memory_map_t* mmaps = _k_init_mb_info->mmap_addr;
-    size_t map_size = _k_init_mb_info->mmap_length / sizeof(multiboot_memory_map_t);
-    for (unsigned int i = 0; i < map_size; i++) {
-        multiboot_memory_map_t mmap = mmaps[i];
-        if (mmap.type == MULTIBOOT_MEMORY_AVAILABLE) {
-            continue;
-        }
-        uint8_t* pa = PG_ALIGN(mmap.addr_low);
-        size_t pg_num = CEIL(mmap.len_low, PG_SIZE_BITS);
-        for (size_t j = 0; j < pg_num; j++)
-        {
-            vmm_set_mapping((pa + (j << PG_SIZE_BITS)), (pa + (j << PG_SIZE_BITS)), PG_PREM_R);
-        }
-    }
+    syscall_install();
+
+    spawn_proc0();
 }
 
+/**
+ * @brief 创建并运行proc0进程
+ *
+ */
 void
-unlock_reserved_memory() {
-    multiboot_memory_map_t* mmaps = _k_init_mb_info->mmap_addr;
-    size_t map_size = _k_init_mb_info->mmap_length / sizeof(multiboot_memory_map_t);
-    for (unsigned int i = 0; i < map_size; i++) {
-        multiboot_memory_map_t mmap = mmaps[i];
-        if (mmap.type == MULTIBOOT_MEMORY_AVAILABLE) {
-            continue;
-        }
-        uint8_t* pa = PG_ALIGN(mmap.addr_low);
-        size_t pg_num = CEIL(mmap.len_low, PG_SIZE_BITS);
-        for (size_t j = 0; j < pg_num; j++)
-        {
-            vmm_unmap_page((pa + (j << PG_SIZE_BITS)));
-        }
+spawn_proc0()
+{
+    struct proc_info* proc0 = alloc_process();
+
+    /**
+     * @brief
+     * 注意：这里和视频中说的不一样，属于我之后的一点微调。
+     * 在视频中，spawn_proc0是在_kernel_post_init的末尾才调用的。并且是直接跳转到_proc0
+     *
+     * 但是我后来发现，上述的方法会产生竞态条件。这是因为spawn_proc0被调用的时候，时钟中断已经开启，
+     * 而中断的产生会打乱栈的布局，从而使得下面的上下文设置代码产生未定义行为（Undefined
+     * Behaviour）。 为了保险起见，有两种办法：
+     *      1. 在创建proc0进程前关闭中断
+     *      2. 将_kernel_post_init搬进proc0进程
+     * （_kernel_post_init已经更名为init_platform）
+     *
+     * 目前的解决方案是2
+     */
+
+    proc0->parent = proc0;
+
+    // 方案1：必须在读取eflags之后禁用。否则当进程被调度时，中断依然是关闭的！
+    // cpu_disable_interrupt();
+
+    /* Ok... 首先fork进我们的零号进程，而后由那里，我们fork进init进程。 */
+
+    // 把当前虚拟地址空间（内核）复制一份。
+    proc0->page_table = vmm_dup_vmspace(proc0->pid);
+
+    // 直接切换到新的拷贝，进行配置。
+    cpu_ldvmspace(proc0->page_table);
+
+    // 为内核创建一个专属栈空间。
+    for (size_t i = 0; i < (KSTACK_SIZE >> PG_SIZE_BITS); i++) {
+        ptr_t pa = pmm_alloc_page(KERNEL_PID, 0);
+        vmm_set_mapping(VMS_SELF,
+                        KSTACK_START + (i << PG_SIZE_BITS),
+                        pa,
+                        PG_PREM_RW,
+                        VMAP_NULL);
     }
+
+    struct exec_param* execp =
+      (struct exec_param*)(KSTACK_TOP - sizeof(struct exec_param));
+    isr_param* isrp = (isr_param*)((ptr_t)execp - sizeof(isr_param));
+
+    *execp = (struct exec_param){ .cs = KCODE_SEG,
+                                  .eip = (ptr_t)__proc0,
+                                  .ss = KDATA_SEG,
+                                  .eflags = cpu_reflags() };
+    *isrp = (isr_param){ .registers = { .ds = KDATA_SEG,
+                                        .es = KDATA_SEG,
+                                        .fs = KDATA_SEG,
+                                        .gs = KDATA_SEG },
+                         .execp = execp };
+
+    proc0->intr_ctx = isrp;
+
+    // 加载x87默认配置
+    asm volatile("fninit\n"
+                 "fxsave (%%eax)" ::"a"(proc0->fxstate)
+                 : "memory");
+
+    // 向调度器注册进程。
+    commit_process(proc0);
+
+    // 由于时钟中断与APIC未就绪，我们需要手动进行第一次调度。这里也会同时隐式地恢复我们的eflags.IF位
+    proc0->state = PS_RUNNING;
+    asm volatile("pushl %0\n"
+                 "jmp switch_to\n" ::"r"(proc0));
+
+    /* Should not return */
+    assert_msg(0, "Unexpected Return");
 }
 
 // 按照 Memory map 标识可用的物理页
 void
-setup_memory(multiboot_memory_map_t* map, size_t map_size) {
+setup_memory(multiboot_memory_map_t* map, size_t map_size)
+{
 
     // First pass, to mark the physical pages
     for (unsigned int i = 0; i < map_size; i++) {
         multiboot_memory_map_t mmap = map[i];
-        kprintf("[MM] Base: 0x%x, len: %u KiB, type: %u\n",
-               map[i].addr_low,
-               map[i].len_low >> 10,
-               map[i].type);
         if (mmap.type == MULTIBOOT_MEMORY_AVAILABLE) {
             // 整数向上取整除法
-            uintptr_t pg = map[i].addr_low + 0x0fffU;
-            pmm_mark_chunk_free(pg >> PG_SIZE_BITS, map[i].len_low >> PG_SIZE_BITS);
-            kprintf(KINFO "[MM] Freed %u pages start from 0x%x\n",
-                   map[i].len_low >> PG_SIZE_BITS,
-                   pg & ~0x0fffU);
+            ptr_t pg = map[i].addr_low + 0x0fffU;
+            pmm_mark_chunk_free(pg >> PG_SIZE_BITS,
+                                map[i].len_low >> PG_SIZE_BITS);
         }
     }
 
     // 将内核占据的页，包括前1MB，hhk_init 设为已占用
     size_t pg_count = V2P(&__kernel_end) >> PG_SIZE_BITS;
-    pmm_mark_chunk_occupied(0, pg_count);
-    kprintf(KINFO "[MM] Allocated %d pages for kernel.\n", pg_count);
-
-
-    size_t vga_buf_pgs = VGA_BUFFER_SIZE >> PG_SIZE_BITS;
-    
-    // 首先，标记VGA部分为已占用
-    pmm_mark_chunk_occupied(VGA_BUFFER_PADDR >> PG_SIZE_BITS, vga_buf_pgs);
-    
-    // 重映射VGA文本缓冲区（以后会变成显存，i.e., framebuffer）
-    for (size_t i = 0; i < vga_buf_pgs; i++)
-    {
-        vmm_map_page(
-            (void*)(VGA_BUFFER_VADDR + (i << PG_SIZE_BITS)), 
-            (void*)(VGA_BUFFER_PADDR + (i << PG_SIZE_BITS)), 
-            PG_PREM_RW
-        );
-    }
-    
-    // 更新VGA缓冲区位置至虚拟地址
-    tty_set_buffer((void*)VGA_BUFFER_VADDR);
+    pmm_mark_chunk_occupied(KERNEL_PID, 0, pg_count, PP_FGLOCKED);
 
-    kprintf(KINFO "[MM] Mapped VGA to %p.\n", VGA_BUFFER_VADDR);
-    
-}
-
-void
-setup_kernel_runtime() {
-    // 为内核创建一个专属栈空间。
-    for (size_t i = 0; i < (K_STACK_SIZE >> PG_SIZE_BITS); i++) {
-        vmm_alloc_page((void*)(K_STACK_START + (i << PG_SIZE_BITS)), PG_PREM_RW);
+    // reserve higher half
+    for (size_t i = L1_INDEX(KERNEL_MM_BASE); i < 1023; i++) {
+        assert(vmm_set_mapping(VMS_SELF, i << 22, 0, 0, VMAP_NOMAP));
     }
-    kprintf(KINFO "[MM] Allocated %d pages for stack start at %p\n", K_STACK_SIZE>>PG_SIZE_BITS, K_STACK_START);
-    assert_msg(kalloc_init(), "Fail to initialize heap");
-}
\ No newline at end of file
+}