-#include <arch/x86/boot/multiboot.h>
+#include <lunaix/block.h>
#include <lunaix/common.h>
+#include <lunaix/fctrl.h>
+#include <lunaix/foptions.h>
+#include <lunaix/fs.h>
+#include <lunaix/fs/twifs.h>
+#include <lunaix/lunaix.h>
#include <lunaix/lunistd.h>
+#include <lunaix/lxconsole.h>
+#include <lunaix/mm/cake.h>
#include <lunaix/mm/pmm.h>
+#include <lunaix/mm/valloc.h>
#include <lunaix/mm/vmm.h>
#include <lunaix/peripheral/ps2kbd.h>
-#include <lunaix/proc.h>
+#include <lunaix/peripheral/serial.h>
#include <lunaix/spike.h>
#include <lunaix/syscall.h>
#include <lunaix/syslog.h>
-#include <stddef.h>
+#include <lunaix/types.h>
+
+#include <sdbg/protocol.h>
#include <hal/acpi/acpi.h>
+#include <hal/ahci/ahci.h>
#include <hal/apic.h>
#include <hal/ioapic.h>
+#include <hal/pci.h>
+#include <hal/rtc.h>
+
+#include <arch/x86/boot/multiboot.h>
+
+#include <klibc/string.h>
+
+#include <ulibc/stdio.h>
LOG_MODULE("PROC0")
void
__do_reserved_memory(int unlock);
-//#define DEMO_SIGNAL
+#define USE_DEMO
+// #define DEMO_SIGNAL
+// #define DEMO_READDIR
+// #define DEMO_IOTEST
+// #define DEMO_INPUT_TEST
+#define DEMO_SIMPLE_SH
+
+extern void
+_pconsole_main();
+
+extern void
+_signal_demo_main();
+
+extern void
+_lxinit_main();
+
+extern void
+_readdir_main();
+
+extern void
+_iotest_main();
+
+extern void
+input_test();
+
+extern void
+sh_main();
+
+void __USER__
+__setup_dir()
+{
+ int errno;
+ mkdir("/mnt");
+ mkdir("/mnt/lunaix-os");
+
+ if ((errno = mount("/dev/sdb", "/mnt/lunaix-os", "iso9660", 0))) {
+ syslog(2, "fail mounting boot medium. (%d)\n", errno);
+ }
+}
void __USER__
__proc0_usr()
{
- if (!fork()) {
-#ifdef DEMO_SIGNAL
- asm("jmp _signal_demo_main");
+ // 打开tty设备(控制台),作为标准输入输出。
+ // tty设备属于序列设备(Sequential Device),该类型设备的上层读写
+ // 无须经过Lunaix的缓存层,而是直接下发到底层驱动。(不受FO_DIRECT的影响)
+ int fdstdout = open("/dev/tty", 0);
+ int fdstdin = dup2(stdout, 1);
+
+ __setup_dir();
+
+ pid_t p;
+
+ if (!(p = fork())) {
+#ifndef USE_DEMO
+ _exit(0);
+#elif defined DEMO_SIGNAL
+ _signal_demo_main();
+#elif defined DEMO_READDIR
+ _readdir_main();
+#elif defined DEMO_IOTEST
+ _iotest_main();
+#elif defined DEMO_INPUT_TEST
+ input_test();
+#elif defined DEMO_SIMPLE_SH
+ sh_main();
#else
- asm("jmp _lxinit_main");
+ _lxinit_main();
#endif
+ printf("==== test end ====\n");
+ _exit(0);
}
+ waitpid(p, 0, 0);
+
while (1) {
yield();
}
init_proc_user_space(__current);
+ // user space
asm volatile("movw %0, %%ax\n"
"movw %%ax, %%es\n"
"movw %%ax, %%ds\n"
void
init_platform()
{
- assert_msg(kalloc_init(), "Fail to initialize heap");
-
- // Fuck it, I will no longer bother this little 1MiB
- // I just release 4 pages for my APIC & IOAPIC remappings
- // for (size_t i = 0; i < 3; i++) {
- // vmm_del_mapping(PD_REFERENCED, (void*)(i << PG_SIZE_BITS));
- // }
+ kprintf(KINFO "\033[11;0mLunaixOS (gcc v%s, %s)\033[39;49m\n",
+ __VERSION__,
+ __TIME__);
// 锁定所有系统预留页(内存映射IO,ACPI之类的),并且进行1:1映射
lock_reserved_memory();
+ // firmware
acpi_init(_k_init_mb_info);
- uintptr_t ioapic_addr = acpi_get_context()->madt.ioapic->ioapic_addr;
- pmm_mark_page_occupied(
- KERNEL_PID, FLOOR(__APIC_BASE_PADDR, PG_SIZE_BITS), 0);
- pmm_mark_page_occupied(KERNEL_PID, FLOOR(ioapic_addr, PG_SIZE_BITS), 0);
-
- vmm_set_mapping(
- PD_REFERENCED, MMIO_APIC, __APIC_BASE_PADDR, PG_PREM_RW, VMAP_NULL);
- vmm_set_mapping(
- PD_REFERENCED, MMIO_IOAPIC, ioapic_addr, PG_PREM_RW, VMAP_NULL);
+ // die
apic_init();
ioapic_init();
+
+ // debugger
+ serial_init();
+ sdbg_init();
+
+ // timers & clock
+ rtc_init();
timer_init(SYS_TIMER_FREQUENCY_HZ);
clock_init();
+
+ // peripherals & chipset features
ps2_kbd_init();
+ block_init();
+ ahci_init();
+
+ pci_init();
- syscall_install();
+ // console
+ console_start_flushing();
+ console_flush();
+
+ // expose cake allocator states to vfs
+ cake_export();
unlock_reserved_memory();
+ // clean up
for (size_t i = 0; i < (uintptr_t)(&__init_hhk_end); i += PG_SIZE) {
vmm_del_mapping(PD_REFERENCED, (void*)i);
pmm_free_page(KERNEL_PID, (void*)i);
size_t pg_num = CEIL(mmap.len_low, PG_SIZE_BITS);
size_t j = 0;
if (!unlock) {
+ kprintf("mem: freeze: %p..%p type=%x\n",
+ pa,
+ pa + pg_num * PG_SIZE,
+ mmap.type);
for (; j < pg_num; j++) {
uintptr_t _pa = pa + (j << PG_SIZE_BITS);
if (_pa >= KERNEL_MM_BASE) {
break;
}
vmm_set_mapping(PD_REFERENCED, _pa, _pa, PG_PREM_R, VMAP_NULL);
+ pmm_mark_page_occupied(
+ KERNEL_PID, _pa >> PG_SIZE_BITS, PP_FGLOCKED);
}
// Save the progress for later unmapping.
mmaps[i].len_low = j * PG_SIZE;
} else {
+ kprintf("mem: reclaim: %p..%p type=%x\n",
+ pa,
+ pa + pg_num * PG_SIZE,
+ mmap.type);
for (; j < pg_num; j++) {
uintptr_t _pa = pa + (j << PG_SIZE_BITS);
vmm_del_mapping(PD_REFERENCED, _pa);
+ if (mmap.type == MULTIBOOT_MEMORY_ACPI_RECLAIMABLE) {
+ pmm_mark_page_free(_pa >> PG_SIZE_BITS);
+ }
}
}
}